# The Weighing Equipment (Non-automatic Weighing Machines) Regulations 2000, Paragraph 3

Extent: E+W+S

In the case where—
(a) a machine has had its stamp obliterated under regulation 43(2) of these Regulations because of an alteration or adjustment involving only the replacement or addition of a dial, chart or pointer, and
(b) the purpose of the alteration or adjustment was to modify an imperial machine to indicate weight in metric units, and
(c) (i) within the period of fifteen days following the making of the alteration or adjustment the requirements of paragraph 4 below were complied with, or
(ii) the period for complying with those requirements has not yet expired,
the appropriate prescribed limits of error upon the first retesting of such a machine with a view to its being passed as fit for use for trade shall be those set out in the Table in paragraph 1 above as being applicable in relation to the obliteration of stamps.

---
Source: https://www.legislation.gov.uk/uksi/2000/932/schedule/3/paragraph/3 (the official version)
Page: https://openlegislation.uk/weighing-equipment-non-automatic-weighing-machines-regulations-2000/schedule-3/paragraph-3
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.