OpenLegislation

Paragraph 1

Changes not yet applied. Later legislation changes this provision in ways not yet written into the text below:

(1)

In this Schedule, the words listed in the first column of the Table below shall have the meanings assigned to them by the paragraphs listed in the second column of the Table which are contained in the MPT Performance Specifications listed in the third column of the Table.

Table

WordsParagraphMPT Specification
“frequency error”4.1.1MPT 1320
4.1.1 Part BMPT 1333
“carrier power”4.2.1MPT 1320
4.2.1 Part BMPT 1333
“frequency deviation”4.3.1MPT 1320
“adjacent channel power”4.4.1MPT 1320
4.3.1 Part BMPT 1333
“spurious emissions” (when used with reference to CB transmitters)

4.5.1

4O.4.1 Part B

MPT 1320

MPT 1333

“spurious emissions” (when used with reference to CB receivers)

5.1.1

5.5.1 Part B

MPT 1320

MPT 1333

“maximum usable sensitivity”5.1.1 Part BMPT 1333
“adjacent channel selectivity”5.2.1 Part BMPT 1333
“spurious response rejection”5.3.1 Part BMPT 1333
“intermodulation response”5.4.1 Part BMPT 1333
(2)

Where reference is made in any provision of this Schedule to more than one MPT performance specification, the specification to be applied in each case shall be that relevant to the frequencies used by the CB apparatus.