Paragraph 1
In this Schedule–
-
“direct sequence spread spectrum modulation” means a form of modulation where a combination of data to be transmitted and a known code sequence (or chip sequence) is used to directly modulate a carrier;
-
“EN 300 220–1” means the European Telecommunications Standard EN 300 220–1 published by ETSI in November 1997;
-
“EN 300 328” means the European Telecommunications Standard EN 300 328 published by ETSI in November 1994, revised and reprinted in November 1996 and amended in July 1997;
-
“EN 300 330” means the European Telecommunications Standard EN 300 330, version 1.2.2 (1999) published by ETSI in 1999;
-
“I-ETS 300 422” means the European Telecommunications Standard I-ETS 300 422 published by ETSI in December 1995;
-
“I-ETS 300 440” means the European Telecommunications Standard I-ETS 300 440 published by ETSI in December 1995 and Corrigendum issued in April 1996;
-
“EN 300 674” means the European Telecommunications Standard EN 300 674 published by ETSI in November 1998;
-
“EN 300 718” means the European Telecommunications Standard EN 300 718 published by ETSI in March 1997;
-
“EN 300 761” means the European Telecommunications Standard EN 300 761 published by ETSI in January 1998;
-
“EN 300 836–1” means the European Telecommunications Standard EN 300 836–1 published by ETSI in May 1998;
-
“EN 301 091” means the European Telecommunications Standard EN 301 091 published by ETSI in June 1998;
-
“EN 301 357” means the European Telecommunications Standard EN 301 357, version 1.2.1 (1999) published by ETSI in 1999;
-
“Fo” means centre frequency;
-
“frequency hopping spread spectrum modulation” means a technique in which the transmitted signal occupies a number of frequencies in time, each for some period of time;
-
“non-manufactured apparatus” means apparatus made up from components, but which is not for retail resale;
-
“prescribed apparatus” means any station or apparatus described in Part III of this Schedule.
-
“radiated level” means the maximum level permitted, referenced to the erp, eirp or field strength as specified in Part III of this Schedule; and
-
“Telemetry”, “Telecommand”, “Television” and “Telephony” have the meanings given to them in the Radio Regulations.