Regulation 5 Amendment of the Wireless Telegraphy (Short Range Devices) (Exemption) Regulations 1993
In the Schedule to the Principal Regulations—
for paragraph 4 there shall be substituted the following—
“Fixed Alarms
4Wireless telegraphy apparatus designed or adapted—
(a)for the transmission of non-verbal signals to wireless telegraphy receiving apparatus installed in or upon a building or vessel in order to activate an alarm; and
(b)so as to be capable of use only on one of the frequencies and at a power not exceeding the maximum for such frequencies specified in the table below—
Frequencies Maximum power erp 161.275 MHz 10 mW 173.225 MHz 10 mW 458.825 MHz 100 mW ”;
paragraph 8 shall be deleted;
for paragraph 9 there shall be substituted the following—
“Mobile and Transportable Alarms
9Wireless telegraphy apparatus designed or adapted—
(a)for the transmission of non-verbal signals to wireless telegraphy receiving apparatus giving warning that the animal, object or person to which the wireless telegraphy transmitting apparatus is attached or located in or upon requires attention or is being interfered with; and
(b)so as to be capable of use only on one of the frequencies and at a power not exceeding the maximum for such frequencies, specified in the table below—
Frequencies Maximum power erp 161.275 MHz 10 mW 173.1875 MHz 10 mW 458.8375 MHz 100 mW ”; and
for paragraph 14 there shall be substituted the following—
“Short Range Data Links
14Wireless telegraphy apparatus designed or adapted—
(a)for the provision of short range data links; and
(b)so as to be capable of use only within the frequency bands and at a power not exceeding the maximum for such frequency bands, for each category of apparatus, specified in the table below—
Category Description of apparatus Frequencies Maximum power eirp 1 Apparatus designed solely for use within one building 2.445-2.455 GHz 100 mW 2 Apparatus designed solely for use within one building 10.675-10.699 GHz 1 W 3 Wideband Wireless Data Systems designed for indoor and/or outdoor use using frequency hopping spread spectrum modulation 2.4-2.4835 GHz 100 mW (Spectral power density 100 mW/ 100 kHz) 4 Wideband Wireless Data Systems designed for indoor and/or outdoor use using direct sequence spread spectrum modulation 2.4-2.4835 GHz 100 mW (Spectral power density 10 mW/MHz) ”