# The Wireless Telegraphy (Ultra-Wideband Equipment) (Exemption) Regulations 2015, Regulation 30: Terms, provisions and limitations

Extent: E+W+S+N.I.

(1) The exemption provided for in regulation 29 shall apply to ultra-wideband equipment which is a building material analysis device and which complies with the requirements of paragraphs (2) to (4) of this regulation.
(2) The ultra-wideband equipment must—
(a) only have the transmitter turned on if manually operated with a non-locking switch;
(b) be used in close proximity to the material being analysed with the emissions being directed into the direction of the object of the analysis; and
(c) switch off automatically after ten seconds without any movement.
(3) The ultra-wideband equipment must not cause or contribute to undue interference to other users of the electromagnetic spectrum.
(4) The ultra-wideband equipment must only emit signals ... which—
(a) are kept to a minimum; and
(b) if the equipment were to be placed on a representative wall (as defined within harmonised standard ETSI EM 302 065-4) would be in accordance with the condition in regulation 31.

---
Source: https://www.legislation.gov.uk/uksi/2015/591/regulation/30 (the official version)
Page: https://openlegislation.uk/wireless-telegraphy-ultra-wideband-equipment-exemption-regulations-2015/regulation-30
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.