OpenLegislation

Regulation 6 Dimensions

Original text. Later amendments are not shown.

(1)

Dimensions indicated on any diagram shown in Schedule 1 or Schedule 4 are expressed in millimetres.

(2)

A dimension (other than one specified as a maximum or minimum dimension) specified in any diagram in Schedule 1 or Schedule 4 may be varied if, in the case of a dimension of the length specified in column (2) of the item in the Table, the variation does not exceed the extent specified in column (3) of the item.

TABLE

ItemLength of dimensionExtent of variation
(1)(2)(3)
1.300 mm or more
(i)

20% of the dimension where the varied dimension is greater than the specified dimension; or

(ii)

10% of the dimension where the varied dimension is less than the specified dimension

2.Less than 300 mm
(i)

30% of the dimension where the varied dimension is greater than the specified dimension; or

(ii)

10% of the dimension where the varied dimension is less than the specified dimension

(3)

Where maximum and minimum dimensions are specified for any element of a sign or road marking, the dimensions chosen for that element shall not be less than the minimum and shall not exceed the maximum.

(4)

Where any diagram in Schedule 4 specifies a dimension for an element of a sign or road marking together with a dimension for that element in brackets, the dimensions so specified shall be alternatives.

(5)

A dimension specified in the 1997 Regulations in relation to a sign prescribed by those Regulations and referred to in these Regulations may be varied to the extent permitted by those Regulations.