Paragraph 7 Commission Delegated Regulation (EU) No 874/2012

(1)

Commission Delegated Regulation (EU) No 874/2012 of 12 July 2012 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to energy labelling of electrical lamps and luminaires is amended as follows.

(2)

In Article 3 (responsibilities of suppliers)—

(a)

in paragraphs 1(b) and 2(a), in both instances, for the words “Member States and to the Commission”, substitute “United Kingdom”;

(b)

in paragraph 2(d), for the words from “Commission” to “Directive 2009/125/EC” substitute “any other requirements for lamps”;

(c)

in the third paragraph, after “Directive 2009/125/EC” insert “or other ecodesign legislation”.

(3)

In Article 4 (responsibilities of dealers), in paragraph 2(c) for the words from “Commission” to “Directive 2009/125/EC”, substitute “any other requirements for lamps”.

(4)

In Article 6 (verification procedure for market surveillance purposes), for “Member States”, substitute “The authorities of the United Kingdom”.

(5)

Omit Article 7 (revision).

(6)

At the end of Article 10 (entry into force and application), omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.

(7)

In Annex 1 (label), in the final paragraph of section 1, after “‘EU ecolabel’” insert “before exit day”.

(8)

In Annex 3 (technical documentation)—

(a)

in subparagraph (c), for “harmonised”, substitute “designated”;

(b)

at the end of the second paragraph, insert “or measures listed in paragraph 4 of Schedule 1 to the Ecodesign for Energy-Related Products Regulations 2010”.

(9)

In Annex 5 (product compliance verification by market surveillance authorities)—

(a)

for each instance of “Member State” or “Member States”, substitute “United Kingdom”;

(b)

in section 1—

(i)

omit subparagraph (4);

(ii)

for the first paragraph, substitute—

“The United Kingdom authorities must use measurement procedures which take into account the generally recognised, state-of-the-art, reliable, accurate and reproducible measurement methods, and must use the measurement and calculation methods set out in Annex 7.”;

(iii)

in the second paragraph—

(aa)

for “4” substitute “3”; and

(bb)

for “harmonised” substitute “designated”.