OpenLegislation

Regulation 83 Commission Regulation (EU) 2017/2400: Annexes

Original text. Later amendments are not shown.

(1)

The Annexes to Commission Regulation (EU) 2017/2400 are amended as follows.

(2)

In Annex II (requirements and procedures: operation of simulation tool)—

(a)

in point 1.1.3, omit the words from “consulting” to “as well as”;

(b)

in Appendix 2—

(i)

after “Regulation (EU) 2017/2400” insert “both as they have effect in domestic law”;

(ii)

in Section II, omit point 2.

(3)

In Annex III (input information: characteristics of the vehicle), in the second subparagraph of point 4.1, for “Annex IV and Annex XI to Directive 2007/46/EC” substitute “Annex II to Regulation (EU) 2018/858”.

(4)

In Annex V (verifying engine data)—

(a)

in appendix 4, in point 7.4, for “EC” substitute “GB”;

(b)

in appendix 6—

(i)

for point 1.3, substitute—

“1.3.

The certification mark as a rectangle surrounding the lower-case letter ‘g’ followed by the number 11.”;

(ii)

in point 1.4, for “Annex VII to Directive 2007/46/EC” substitute “point 2.4 of Annex IV to Commission Implementing Regulation (EU) 2020/683”;

(iii)

in point 1.4.1—

(aa)

for the image, substitute—

“CO2 from heavy duty vehicles – engine ”

(bb)

in the words following the image, omit “in Poland (e20),”;

(iv)

in point 1.5.1—

(aa)

for the image, substitute—

“2017-2400”

(bb)

in the words following the image, omit “in Poland (e20),”;

(v)

in point 2.1, in the example certification number, at the beginning, for “eX” substitute “g11”;

(vi)

in the table following point 2.1, in the column headed “Section 3” for “Latest amending Regulation (ZZZZ/ZZZZ)” substitute “Latest amending Statutory Instrument (S.I. ZZZZ/ZZZZ)”.

(5)

In Annex VI (verifying transmission, torque convertor and other data)—

(a)

in point 3.4.7, for “an approval” substitute “the approval”;

(b)

in point 8, for “an approval” substitute “the approval”;

(c)

in Appendix 1, in the second paragraph, omit “Regulation (EC) No XXXXX and”;

(d)

in Appendices 2, 3, 4 and 5, in point 0.8 in each case, for “EC approval” substitute “GB approval”;

(e)

in Appendix 7—

(i)

for point 1.3, substitute—

“1.3.

The certification mark as a rectangle surrounding the lower-case letter ‘g’ followed by the number 11.”;

(ii)

in point 1.4, for “Annex VII to Directive 2007/46/EC” substitute “point 2.4 of Annex IV to Commission Implementing Regulation (EU) 2020/683”;

(iii)

in point 1.5—

(aa)

for the image, substitute—

“transmission (torque converter etc)”

(bb)

in the words following the image, omit “in Poland (e20),”;

(iv)

in point 2.1, in the example certification number, at the beginning, for “eX” substitute “g11”;

(v)

in the table following point 2.1, in the column headed “Section 3”, for “Latest amending Regulation (ZZZZ/ZZZZ)” substitute “Latest amending Statutory Instrument (S.I. ZZZZ/ZZZZ)”.

(6)

In Annex VII (verifying axle data)—

(i)

in point 5.1, for “Article 12 of Directive 2007/46/EC” substitute “Article 31 of Regulation (EU) 2018/858”;

(b)

in Appendix 1—

(i)

in the opening section—

(aa)

after “2017/2400” the first time it appears, insert “as it has effect in domestic law, as last amended by S.I. …./….”;

(bb)

omit the following words “Commission Regulation (EU) 2017/2400 as last amended by …”;

(ii)

in Section I, in point 0.5, for “EC” substitute “GB”;

(c)

in Appendix 5—

(i)

for point 1.3, substitute—

“1.3.

The certification mark as a rectangle surrounding the lower-case letter ‘g’ followed by the number 11.”;

(ii)

in point 1.4, for “Annex VII to Directive 2007/46/EC” substitute “point 2.4 of Annex IV to Commission Implementing Regulation (EU) 2020/683”;

(iii)

in point 1.4.1—

(aa)

for the image, substitute—

“axle data”

(bb)

in the words following the image, omit “in Poland (e20),”;

(iv)

in point 2.1, in the example certification number, at the beginning, for “eX” substitute “g11”;

(v)

in the table following point 2.1, in the column headed “Section 3”, for “Latest amending Regulation (ZZZZ/ZZZZ)” substitute “Latest amending Statutory Instrument (S.I. ZZZZ/ZZZZ)”.

(7)

In Annex VIII (verifying air drag data)—

(a)

in point 2(12), for the definition ‘EMS’ substitute “‘EMS’ means the European Modular System, denoting a vehicle combination consisting of a vehicle of category N, towing both a semi-trailer and either a trailer or a dolly, whether or not coupled together in that order”;

(b)

in Appendix 1—

(i)

in the opening section—

(aa)

after “2017/2400” the first time it appears, insert “as last amended by S.I. …./….”;

(bb)

omit the following words “Commission Regulation (EU) 2017/2400 as last amended by …”;

(ii)

in Section I, in point 0.6, for “EC” substitute “GB”;

(c)

in Appendix 4—

(i)

in tables 11 and 13, in the second row (width), omit “(96/53/EC)”;

(ii)

in table 15—

(aa)

omit “(96/53/EC)” each time it occurs;

(bb)

in the eighth row (front overhang), and the tenth row (corner front/side panel), omit “, 96/53/EC”;

(d)

in Appendix 8—

(i)

for point 1.3, substitute—

“1.3.

The certification mark as a rectangle surrounding the lower-case letter ‘g’ followed by the number 11.”;

(ii)

in point 1.4, for “Annex VII to Directive 2007/46/EC” substitute “point 2.4 of Annex IV to Commission Implementing Regulation (EU) 2020/683”;

(iii)

in point 1.4.1—

(aa)

for the image, substitute—

“air drag of cab”

(bb)

in the words following the image, omit “in Poland (e20),”;

(iv)

in point 2.1, in the example certification number, at the beginning, for “eX” substitute “g11”;

(v)

in the table following point 2.1, in the column headed “Section 3”, for “Latest amending Regulation (ZZZZ/ZZZZ)” substitute “Latest amending Statutory Instrument (S.I. ZZZZ/ZZZZ)”.

(8)

In Annex X (certification procedure for pneumatic tyres)—

(a)

in point 3.3—

(i)

in the opening words, for “Article 41 of Directive 2007/46/EC” substitute “Article 68 of Regulation (EU) 2018/858”;

(ii)

in point (i), for “an approval” substitute “the approval”;

(iii)

in point (ii), for “Directive 2007/46/EC, Article 41” substitute “Article 68(1)(a) of Regulation (EU) 2018/858,”;

(b)

in point 3.4.4, for “Article 19(2) of Directive 2007/46/EC” substitute “Article 38 of Regulation (EU) 2018/858”;

(c)

in Appendix 1, in the opening words, for “as amended by Commission Regulation (EU) 2019/318” substitute “as last amended by S.I. …. / ….”;

(d)

in Appendix 4—

(i)

in point 1.1, in the example certification number, at the beginning, for “eX” substitute “g11”;

(ii)

in the table following point 1.1, in the column headed “Section 3”, for “Latest amending Regulation (ZZZZ/ZZZZ)” substitute “Latest amending Statutory Instrument (S.I. ZZZZ/ZZZZ)”.

(9)

In Annex Xa (conformity of simulation tool operation and of CO2 emissions and fuel consumption related properties etc)—

(a)

in paragraph 3(f), after “manufacturer” insert “in Great Britain”;

(b)

in the table following paragraph 3(f), for the heading to the second column, substitute

(c)

“Verification testing procedure relevant vehicles sold in GB/year”.