Paragraph 12 Commission Regulation (EU) No 327/2011I1
United Kingdom
Commission Regulation (EU) No 327/2011 of 30 March 2011 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for fans driven by motors with an electric input power between 125 W and 500 kW is amended as follows.
In Article 1 (subject matter and scope), in paragraph 1, for “Directive 2009/125/EC”, substitute “ the Ecodesign for Energy-Related Products Regulations 2010 ”.
In Article 2 (definitions), at the beginning, for the words from “In addition” to “shall apply”, substitute—
“The definitions set out in the Ecodesign for Energy-Related Products Regulations 2010 apply; and for any term that is not defined in those Regulations, the definitions set out in Directive 2009/125/EC of the European Parliament and of the Council of 21 October 2009 establishing a framework for the setting of ecodesign requirements for energy-related products, as it had effect immediately before F1IP completion day, apply. The following definitions also apply—”.
For Article 4 (conformity assessment), substitute—
“For the purposes of regulation 4(2)(a) of the Ecodesign for Energy-Related Products Regulations 2010, the procedure for assessing whether an energy-related product complies with this implementing measure is the internal design control system set out in Part 1 of Schedule 1A to the Ecodesign for Energy-Related Products Regulations 2010 or the management system for assessing conformity set out in Part 2 of Schedule 1A to those Regulations.”.
For Article 5 (verification procedure for market surveillance purposes), substitute—
“When performing market surveillance checks to assess compliance with the requirements set out in this Regulation, the authorities of F2Great Britain must apply the verification procedure described in Annex 3.”.
Omit Article 7 (revision).
At the end of Article 8 (entry into force), omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.
In Annex 2 (measurements and calculations), in paragraph 2, omit the words from “, including” to “Union”.
Annex 3 (product compliance verification by market surveillance authorities) is amended as follows—
in each instance, for “Member State” or “Member States”, substitute “ F3Great Britain ”;
for the second paragraph, substitute—
“When verifying the compliance of a product model with the requirements laid down in this Regulation, for the requirements referred to in this Annex the authorities of F4Great Britain must apply the following procedure—”;
in subparagraph (2)(a)—
for “point 2 of Annex IV to Directive 2009/125/EC (declared values)” substitute “ paragraph 1(2) of Part 1 of Schedule 1A to the Ecodesign for Energy-Related Products Regulations 2010 ”; and
for “paragraph (g) thereof”, substitute “ paragraph 1(2)(b)(vii) of Part 1 of Schedule 1A to those Regulations ”;
subparagraph (6) is omitted; and
in the fourth paragraph—
for “6” substitute “ 5 ”; and
for “harmonised” substitute “ designated ”.
Annotations
Textual amendments
- F1
Words in Regulations substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 4
- F2
Words in Sch. 2 para. 12(5) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(3)(4)(b)(xi)
- F3
Words in Sch. 2 para. 12(9)(a) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(b)(xi)
- F4
Words in Sch. 2 para. 12(9)(b) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(3)(4)(b)(xi)
Commencement
- I1
Sch. 2 para. 12 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)