OpenLegislation

Paragraph 13 I1

England, Wales and Scotland

For the parameters set out in F1Tables 10 and 11 no other validity criteria or verification tolerances, such as those set out in designated standards or in any other measurement method, may be applied.

Table 10: Validity criteria

ParameterValidity criteria
Average final moisture content of the eco programme µtThe determined value must be measured and calculated and be lower than 1.5 %.

Table 11: Verification tolerances

ParameterVerification tolerances
E dry and Edry½ The determined value (*) must not exceed the declared value of Edry and E dry½ by more than 6%.
Eg dry and Egdry½ The determined value (*) must not exceed the declared value of Egdry and Eg dry½ by more than 6%.
Eg dry, a and Egdry½, a The determined value (*) must not exceed the declared value of Egdry, a and Eg dry½, a by more than 6%.
CtThe determined value (*) must not be less than the declared value of Ct by more than 6%.
T dry and Tdry½ The determined value (*) must not exceed the declared value of Tdry and T dry½ by more than 6%.
P o The determined value (*) must not exceed the declared value by more than 0.10 W.
P sm The determined value (*) must not exceed the declared value by more than 10% if the declared value is higher than 1.00 W, or by more than 0.10 W if the declared value is lower than or equal to 1.00 W.
P ds The determined value (*) must not exceed the declared value by more than 10% where the declared value is higher than 1.00 W, or by more than 0.10 W if the declared value is lower than or equal to 1.00 W.
Acoustic airborne noise emissionsThe determined value (*) must not exceed the declared value by more than 2 dB with respect to 1 pW.
Repairability indexThe determined value of the repairability index must not exceed the declared value by more than 4%.
(*) Where three additional units are tested in accordance with paragraph 6, the determined value means the arithmetical mean of the values determined for those three additional units.

Annotations

Textual amendments

F1

Words in Sch. 13 para. 13 substituted (27.7.2026) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) Regulations 2026 (S.I. 2026/750), regs. 1(2), 18

Commencement

I1

Sch. 13 para. 13 in force at 19.9.2026, see reg. 2(2)(e)