OpenLegislation

Paragraph 4 I1

England, Wales and Scotland

As part of verifying the compliance of a household tumble dryer model with the requirements referred to in Part 3 of these Regulations, the market surveillance authority must apply the following procedure—

(a)

the market surveillance authority must verify one single unit of the model;

(b)

the model must be considered to comply with the applicable requirements where it meets all the following conditions—

(i)

the declared values given in the technical documentation pursuant to these Regulations and, where applicable, the values used to calculate such declared values, are not more favourable for the supplier than the corresponding values given in the test reports;

(ii)

the values published on the label and in the product information sheet are not more favourable for the supplier than the declared values, and the indicated energy efficiency class, the condensation efficiency class and the acoustic airborne noise emission class are not more favourable for the supplier than the class determined by the declared values;

(iii)

the values of the relevant parameters as measured in testing and the values calculated from these measurements comply with—

(aa)

the validity criteria set out in Table 10;

(bb)

the respective verification tolerances set out in Table 11.

Annotations

Commencement

I1

Sch. 13 para. 4 in force at 19.9.2026, see reg. 2(2)(e)