Paragraph 3 I1
England, Wales and Scotland
As part of verifying the compliance of a household tumble dryer model with F1the ecodesign requirements, the market surveillance authority must apply the following procedure—
the market surveillance authority must verify one single unit of the model;
the model must be considered to comply with the applicable requirements where it meets all the following conditions—
the declared values given in the technical documentation, and, where applicable, the values used to calculate such declared values, are not more favourable for the manufacturer, importer or authorised representative than the results of the corresponding measurements made pursuant to paragraph 1(2)(b)(vii) of Schedule 1A to the 2010 Regulations;
the declared values meet all requirements set out in the ecodesign requirements, and any required product information published by the manufacturer, importer or authorised representative does not contain values that are more favourable for the manufacturer or importer than the declared values;
when the market surveillance authority checks the unit of the model, any software update system that may have been set up by the manufacturer, importer or authorised representative complies with the requirements set out in regulation 10;
when the market surveillance authority checks the unit of the model, it complies with the following Parts of Schedule 2—
Part 1 (programme requirements);
Part 5 (resource efficiency requirements);
Part 6 (information requirements);
when the market surveillance authority tests the unit of the model, the values of the relevant parameters as measured in testing and the values calculated from these measurements comply with—
the validity criteria set out in Table 3;
the respective verification tolerances set out in Table 4.
Annotations
Textual amendments
- F1
Words in Sch. 6 para. 3 substituted (27.7.2026) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) Regulations 2026 (S.I. 2026/750), regs. 1(2), 16
Commencement
- I1
Sch. 6 para. 3 in force at 10.4.2026, see reg. 2(1)(f)