OpenLegislation

Paragraph 9 I1

England, Wales and Scotland

For the parameters in Table 3 and in Table 4 no other validity criteria or verification tolerances, such as those set out in designated standards or in any other measurement method, may be applied.

Table 3: Validity criteria

ParameterValidity criteria
Average final moisture content of the eco programme µtThe determined value must be measured and calculated and be lower than 1.5 %.

Table 4: Verification tolerances

ParameterVerification tolerances
E dry and Edry½ The determined value (*) must not exceed the declared value of Edry and E dry½ by more than 6%.
Eg dry and Egdry½ The determined value (*) must not exceed the declared value of Egdry and Eg dry½ by more than 6%.
Eg dry,a and Egdry½,a The determined value (*) must not exceed the declared value of Egdry,a and Eg dry½,a by more than 6%.
CtThe determined value (*) must not be less than the declared value of Ct by more than 6%.
T dry and Tdry½ The determined value (*) must not exceed the declared value of Tdry and T dry½ by more than 6%.
P o The determined value (*) of P o must not exceed the declared value by more than 0.10 W.
Psm The determined value (*) of Psm must not exceed the declared value by more than 10% if the declared value is higher than 1.00 W, or by more than 0.10 W if the declared value is lower than or equal to 1.00 W.
P ds The determined value (*) of Pds must not exceed the declared value by more than 10% where the declared value is higher than 1.00 W, or by more than 0.10 W if the declared value is lower than or equal to 1.00 W.
Acoustic airborne noise emissionsThe determined value (*) must not exceed the declared value by more than 2 dB with respect to 1 pW.
(*) Where three additional units are tested in accordance with paragraph 5(c), the determined value means the arithmetical mean of the values determined for those three additional units.

Annotations

Commencement

I1

Sch. 6 para. 9 in force at 10.4.2026, see reg. 2(1)(f)