Paragraph 1

Supplier's trade mark.

Supplier's model identifier.

The energy efficiency class of the model, determined in accordance with Schedule 3 and expressed as “Energy efficiency class on a scale of A (more efficient) to G (less efficient)”. Where this information is provided in a table, it may be expressed by other means provided it is clear that the scale is from A (more efficient) to G (less efficient).

Where the information is provided in a table, and where some of the regulated appliances listed in the table have been granted a “European Union eco-label” under Regulation (EC) No 1980/2000, the row heading shall state “European Union eco-label” and the entry shall consist of a copy of the eco-label. This provision is without prejudice to any requirements under the Community eco-label award scheme.

The indicative annual consumption of energy based on an average use of 500 hours per year, determined in accordance with the test procedures of the harmonised standard (conditions T1 “moderate”), as defined in Note V to paragraph 2 of Schedule 1.

The cooling output defined as the cooling capacity in kW of the regulated appliance in cooling mode at full load, determined in accordance with the test procedures of the harmonised standard (conditions T1 “moderate”), as defined in Note VI to paragraph 2 of Schedule 1.

The EER (energy efficiency ratio) of the regulated appliance in cooling mode at full load, determined in accordance with the test procedures of the harmonised standard (conditions T1 “moderate”).

The type of regulated appliance: cooling only, cooling/heating.

The cooling mode: air cooled, water cooled.

In the case of regulated appliances with heating capability:

Noise during standard function, where applicable M1.

Suppliers may include in addition the information in sub-paragraphs (5) to (8) in respect of other test conditions determined in accordance with the test procedures of the harmonised standard.