Division 6.2 CONTROL-COMMAND SUBSYSTEM

This section deals with EC declaration of verification of the control-command subsystem. As stated in dection 2 the application of the control-command subsystem is treated as two assemblies:

• the on-board assembly,

• the trackside assembly.

For each assembly a declaration of verification is needed. The scope of the EC declaration of verification, according to Directive 96/48/EC, includes the verification of the integration of the interoperability constituents that are part of the relevant subsystem. Tables 6.1 and 6.2 define the characteristics to be verified, and reference European specifications to be applied.

F1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

The following requirements apply to both the on-board assembly and the trackside assembly. Each assembly shall satisfy:

• the EC verification requirements of Directive 96/48/EC (Annex VI),

• the requirements on the EC declaration of verification of Directive 96/48/EC (Annex V).

The EC declaration of verification is the task of the awarding entity (this could be e.g. the infrastructure manager or the train operator).

F2The declaration of verification of on-board and trackside assemblies, together with the certificates of conformity, is sufficient to ensure that an on-board assembly will operate with a trackside assembly equipped with corresponding functions without an additional subsystem declaration of verification.

The references to the integration procedures and the test requirements of the on-board and trackside assemblies are specified in Annex A, indices 32 and 33.