Division 2.2.4.1

The impactor, including foam covering and skin, shall be suspended horizontally by three wire ropes of 1,5 ± 0,2 mm diameter and of 2,0 m minimum length, as shown in Figure 5a. It shall be suspended with its longitudinal axis horizontal, with a tolerance of ± 0,5°, and perpendicular to the direction of the certification impactor motion, with a tolerance of ± 2°. The impactor shall have the intended orientation about its longitudinal axis, for the correct operation of its knee joint, with a tolerance of ± 2°. The impactor must meet the requirements of point 3.4.1.1, Chapter II of Part II with the attachment bracket(s) for the wire ropes fitted.