Commission Decision of 21 February 2007 on allowing the use of the radio spectrum for equipment using ultra-wideband technology in a harmonised manner in the Community (notified under document number C(2007) 522) (Text with EEA relevance) (2007/131/EC) (repealed) (revoked)
EU Decision 2007/131 · Adopted 21 February 2007 · Extends to United Kingdom
Commission Decision
of 21 February 2007
on allowing the use of the radio spectrum for equipment using ultra-wideband technology in a harmonised manner in the Community
(notified under document number C(2007) 522)
(Text with EEA relevance)
(2007/131/EC) (repealed) (revoked)
F1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Annotations to the whole text
Textual amendments
- F1
Decision revoked (31.12.2020) by The Radio Spectrum (EU Exit) Regulations 2018 (S.I. 2018/1385), reg. 1, Sch. 2 para. 8; 2020 c. 1, Sch. 5 para. 1(1)
Contents
- 1Article 1 Repealed
- 2Article 2 Repealed
- 3Article 3 Repealed
- 4Article 4 Repealed
- 5Article 5 Repealed
- Annex Repealed
- 1GENERIC UWB USAGE Repealed
- 2LOCATION TRACKING SYSTEMS TYPE 1 (LT1) Repealed
- 3UWB DEVICES INSTALLED IN ROAD AND RAIL VEHICLES Repealed
- 4UWB ONBOARD AIRCRAFT Repealed
- 5MATERIAL SENSING DEVICES USING UWB TECHNOLOGY Repealed
- 5.1Material sensing devices Repealed
- 5.2Building material analysis devices (BMA) Repealed
- 1BMA Devices permitted under this Decision shall fulfil the following requirements: Repealed
- 2Emissions radiating from BMA devices shall be kept to a minimum and in any case not exceed the maximum power limits within the table below with the BMA device on a representative wall as defined within ETSI EN 302 065-4. Repealed
1F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1GENERIC UWB USAGEF1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2LOCATION TRACKING SYSTEMS TYPE 1 (LT1)F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3UWB DEVICES INSTALLED IN ROAD AND RAIL VEHICLESF1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4UWB ONBOARD AIRCRAFTF1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5MATERIAL SENSING DEVICES USING UWB TECHNOLOGYF1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.1Material sensing devicesF1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.2Building material analysis devices (BMA)F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1BMA Devices permitted under this Decision shall fulfil the following requirements:F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2Emissions radiating from BMA devices shall be kept to a minimum and in any case not exceed the maximum power limits within the table below with the BMA device on a representative wall as defined within ETSI EN 302 065-4.F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .