Division BAT-associated emission levels
United Kingdom
See Table 20 and Table 21.
The BAT-AELs in Table 20 and Table 21 also apply to the paper and board making process of integrated kraft, sulphite, CTMP and CMP pulp and paper mills.
The reference waste water flow for non-integrated paper and board mills is set out in BAT 5.
Table 20
BAT-associated emission levels for the direct waste water discharge to receiving waters from a non-integrated paper and board mill (excluding speciality paper)
For graphic paper mills, the upper end of the range refers to mills manufacturing paper that use starch for the coating process. | |
| Parameter | Yearly averagekg/t |
|---|---|
| Chemical oxygen demand (COD) | 0,15 – 1,5f1 |
| Total suspended solids (TSS) | 0,02 – 0,35 |
| Total nitrogen | 0,01 – 0,1 0,01 – 0,15 for tissue paper |
| Total phosphorus | 0,003 – 0,012 |
| Adsorbable organically bound halogens (AOX) | 0,05 for decor and wet strength paper |
The BOD concentration in the treated effluents is expected to be low (around 25 mg/l as a 24-hour composite sample).
Table 21
BAT-associated emission levels for the direct waste water discharge to receiving waters from a non-integrated speciality paper mill
Mills having special characteristics, such as a high number of grade changes (e.g. of ≥ 5 per day as a yearly average) or producing very light-weight speciality papers (≤ 30 g/m2 as yearly average) might have higher emissions than the upper end of the range. | |
The upper end of the BAT-AEL range refers to mills producing highly comminuted paper which requires intensive refining and to mills with frequent changes of paper grades (e.g. ≥ 1 – 2 changes/day as yearly average). | |
| Parameter | Yearly averagekg/tf2 |
|---|---|
| Chemical oxygen demand (COD) | 0,3 – 5f3 |
| Total suspended solids (TSS) | 0,10 – 1 |
| Total nitrogen | 0,015 – 0,4 |
| Total phosphorus | 0,002 – 0,04 |
| Adsorbable organically bound halogens (AOX) | 0,05 for decor and wet strength paper |
Annotations
Footnotes
- f1
-
For graphic paper mills, the upper end of the range refers to mills manufacturing paper that use starch for the coating process.
- f2
-
Mills having special characteristics, such as a high number of grade changes (e.g. of ≥ 5 per day as a yearly average) or producing very light-weight speciality papers (≤ 30 g/m2 as yearly average) might have higher emissions than the upper end of the range.
- f3
-
The upper end of the BAT-AEL range refers to mills producing highly comminuted paper which requires intensive refining and to mills with frequent changes of paper grades (e.g. ≥ 1 – 2 changes/day as yearly average).