OpenLegislation

Division BAT 68

United Kingdom

Original text. Later amendments are not shown.

In order to prevent or reduce dust and metal emissions to air from melting and molten metal treatment and casting in primary aluminium production, BAT is to use one or both of the techniques given below.

Description of the technique is given in Section 1.10.

Technique
aUse of liquid metal from electrolysis and uncontaminated aluminium material, i.e. solid material free of substances such as paint, plastic or oil (e.g. the top and the bottom part of the billets that are cut for quality reasons)
bBag filterf1

BAT-associated emission levels: See Table 13.

Table 13

BAT-associated emission levels for dust emissions to air from melting and molten metal treatment and casting in primary aluminium production

As an average of the samples obtained over a year.

The lower end of the range is associated with the use of a bag filter.

ParameterBAT-AEL (mg/Nm3)f2 f3
Dust2-25

Annotations

Footnotes

f1

Description of the technique is given in Section 1.10.

f2

As an average of the samples obtained over a year.

f3

The lower end of the range is associated with the use of a bag filter.

Notes on Division 1.3.3.1.2

Footnotes

f1

As mass of pollutant emitted during a year from the electrolysis house divided by the mass of liquid aluminium produced in the same year.

f2

These BAT-AELs are not applicable to plants that due to their configuration cannot measure roof emissions.