OpenLegislation

Council Directive of 26 July 1971 on the approximation of the laws of the Member States relating to 5 to 50 kilogramme medium accuracy rectangular bar weights and 1 to 10 kilogramme medium accuracy cylindrical weights (71/317/EEC) (repealed)

EU Directive 1971/317 · Adopted 26 July 1971 · Extends to United Kingdom

Original text. legislation.gov.uk does not revise this item, so later amendments are not shown here. Changes made to it are listed under each provision when known.

Council Directive

of 26 July 1971

on the approximation of the laws of the Member States relating to 5 to 50 kilogramme medium accuracy rectangular bar weights and 1 to 10 kilogramme medium accuracy cylindrical weights

(71/317/EEC) (repealed)

F1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Annotations to the whole text

Textual amendments

F1

Repealed by Directive 2011/17/EU of the European Parliament and of the Council of 9 March 2011 repealing Council Directives 71/317/EEC, 71/347/EEC, 71/349/EEC, 74/148/EEC, 75/33/EEC, 76/765/EEC, 76/766/EEC and 86/217/EEC regarding metrology Text with EEA relevance.

Contents

  1. 1Article 1 Repealed
  2. 2Article 2 Repealed
  3. 3Article 3 Repealed
  4. 4Article 4 Repealed
  5. 5Article 5 Repealed
  6. Signature
  7. Annex I: RECTANGULAR BAR WEIGHTS Repealed
  8. Shape, constituent material and method of manufacture Repealed
  9. 1.1Division 1.1 Repealed
  10. 1.2Material used: Repealed
  11. Adjustment cavity Repealed
  12. Type 1 Repealed
  13. 2.1Division 2.1 Repealed
  14. 2.2Division 2.2 Repealed
  15. 2.3Division 2.3 Repealed
  16. Type 2 Repealed
  17. 2.4Division 2.4 Repealed
  18. 2.5Division 2.5 Repealed
  19. 2.6Division 2.6 Repealed
  20. Adjustment Repealed
  21. 3.1Division 3.1 Repealed
  22. Positioning of the EEC initial verification mark Repealed
  23. 4.1Division 4.1 Repealed
  24. Markings and distinctive symbols Repealed
  25. 5.1Division 5.1 Repealed
  26. 5.2Division 5.2 Repealed
  27. Dimensions and tolerances Repealed
  28. 6.1Division 6.1 Repealed
  29. 6.2Division 6.2 Repealed
  30. 7Maximum permissible errors Repealed
  31. Surface finish Repealed
  32. 8.1Division 8.1 Repealed
  33. Annex IIRECTANGULAR BAR WEIGHTS Repealed
  34. Annex III: CYLINDRICAL WEIGHTS Repealed
  35. Shape, constituent material and method of manufacture Repealed
  36. 1.1Division 1.1 Repealed
  37. 1.2Material used: any material with a density of 7 to 9·5 g/cm3, of a hardness at least equal to that of cast brass, not less resistant to corrosion and not more friable than grey cast iron, and with a surface comparable to that of grey cast iron carefully cast in a mould of fine sand. Repealed
  38. 1.3Division 1.3 Repealed
  39. Adjusting cavity Repealed
  40. 2.1Division 2.1 Repealed
  41. 2.2Division 2.2 Repealed
  42. 2.3Division 2.3 Repealed
  43. 2.4Division 2.4 Repealed
  44. 2.5Division 2.5 Repealed
  45. Adjustment Repealed
  46. 3.1Division 3.1 Repealed
  47. Positioning of the EEC initial verification mark Repealed
  48. 4.1Division 4.1 Repealed
  49. 4.2Division 4.2 Repealed
  50. Markings and distinctive symbols Repealed
  51. 5.1Division 5.1 Repealed
  52. 5.2Division 5.2 Repealed
  53. 5.3The nominal value of the weight is indicated in the form: Repealed
  54. Dimensions and their tolerances Repealed
  55. 6.1Division 6.1 Repealed
  56. 6.2Division 6.2 Repealed
  57. 7Maximum permissible errors Repealed
  58. Surface finish Repealed
  59. 8.1Division 8.1 Repealed
  60. Annex IVCYLINDRICAL WEIGHTS Repealed

1F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Signature

F1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.1F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.2Material used:F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.1F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.2F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.3F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.4F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.5F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.6F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.1F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.1F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.1F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.2F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6.1F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6.2F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7Maximum permissible errorsF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8.1F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Annex IIRECTANGULAR BAR WEIGHTSF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.1F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.2Material used: any material with a density of 7 to 9·5 g/cm3, of a hardness at least equal to that of cast brass, not less resistant to corrosion and not more friable than grey cast iron, and with a surface comparable to that of grey cast iron carefully cast in a mould of fine sand.F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.3F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.1F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.2F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.3F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.4F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.5F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.1F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.1F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.2F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.1F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.2F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.3The nominal value of the weight is indicated in the form:F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6.1F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6.2F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7Maximum permissible errorsF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8.1F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Annex IVCYLINDRICAL WEIGHTSF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .