OpenLegislation

Council Directive 92/114/EEC of 17 December 1992 relating to the external projections forward of the cab's rear panel of motor vehicles of category N (repealed)

EU Directive 1992/114 · Adopted 17 December 1992 · Extends to United Kingdom

Original text. legislation.gov.uk does not revise this item, so later amendments are not shown here. Changes made to it are listed under each provision when known.

Council Directive 92/114/EEC

of 17 December 1992

relating to the external projections forward of the cab's rear panel of motor vehicles of category N (repealed)

F1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Annotations to the whole text

Textual amendments

F1

Repealed by Regulation (EC) No 661/2009 of the European Parliament and of the Council of 13 July 2009 concerning type-approval requirements for the general safety of motor vehicles, their trailers and systems, components and separate technical units intended therefor (Text with EEA relevance).

Contents

  1. 1Article 1 Repealed
  2. 2Article 2 Repealed
  3. 3Article 3 Repealed
  4. 4Article 4 Repealed
  5. 5Article 5 Repealed
  6. Signature
  7. Annex I Repealed
  8. 1SCOPE Repealed
  9. 2DEFINITIONS Repealed
  10. 2.1Division 2.1 Repealed
  11. 2.2Division 2.2 Repealed
  12. 2.3Division 2.3 Repealed
  13. 2.4Division 2.4 Repealed
  14. 2.5Division 2.5 Repealed
  15. 2.6Division 2.6 Repealed
  16. 2.7‘Floor line’ means a line determined as follows: Repealed
  17. 2.8Division 2.8 Repealed
  18. 2.9Division 2.9 Repealed
  19. GENERAL REQUIREMENTS Repealed
  20. 3.1The provisions of this Directive do not apply to these parts of the ‘external surface’ of the vehicle which, with the vehicle unladen, with doors, windows, access lids, etc., in the closed position are either: Repealed
  21. 3.2Division 3.2 Repealed
  22. 3.3Division 3.3 Repealed
  23. 3.4Division 3.4 Repealed
  24. SPECIFIC REQUIREMENTS Repealed
  25. Ornaments, commercial symbols, letters and numbers of commercial markings Repealed
  26. 4.1.1Division 4.1.1 Repealed
  27. 4.1.2Division 4.1.2 Repealed
  28. Headlamp visors and rims Repealed
  29. 4.2.1Division 4.2.1 Repealed
  30. 4.2.2Division 4.2.2 Repealed
  31. 4.2.3Division 4.2.3 Repealed
  32. 4.3Grilles Repealed
  33. Windscreen and headlamp cleaning devices Repealed
  34. 4.4.1Division 4.4.1 Repealed
  35. 4.4.2Division 4.4.2 Repealed
  36. Protective devices (bumpers) Repealed
  37. 4.5.1Division 4.5.1 Repealed
  38. 4.5.2Division 4.5.2 Repealed
  39. 4.5.3Division 4.5.3 Repealed
  40. 4.5.4Division 4.5.4 Repealed
  41. Handles, hinges, pushbuttons of doors, luggage compartments, bonnets, vents, access flaps and grab handles Repealed
  42. 4.6.1Division 4.6.1 Repealed
  43. 4.6.2If lateral door handles rotate to operate, they must meet one or other of the following requirements: Repealed
  44. 4.7Running boards Repealed
  45. 4.8Lateral air and rain deflectors and window anti-smear air deflectors Repealed
  46. 4.9Sheet metal edges Repealed
  47. Wheel nuts, hub caps and protective devices Repealed
  48. 4.10.1Division 4.10.1 Repealed
  49. 4.10.2Division 4.10.2 Repealed
  50. 4.10.3Division 4.10.3 Repealed
  51. Jacking points and exhaust pipe(s) Repealed
  52. 4.11.1Division 4.11.1 Repealed
  53. 4.11.2Division 4.11.2 Repealed
  54. 4.12Division 4.12 Repealed
  55. APPLICATION FOR EEC TYPE-APPROVAL Repealed
  56. 5.1Division 5.1 Repealed
  57. 5.2It must be accompanied by the undermentioned documents in triplicate: Repealed
  58. 5.3The applicant must submit to the technical service responsible for conducting the approval test: Repealed
  59. 6EEC TYPE-APPROVAL Repealed
  60. EXTENSION OF EEC TYPE-APPROVAL Repealed
  61. 7.1Every modification of the vehicle type or of its external projections forward of the cab's rear panel must be communicated to the administrative department which approved the vehicle type. That department may then either: Repealed
  62. 7.2Division 7.2 Repealed
  63. Annex II: MEASUREMENT OF PROJECTIONS AND DISTANCES Repealed
  64. METHOD OF DETERMINING THE DIMENSIONS OF THE PROJECTION OF A PART FITTED ON THE EXTERNAL SURFACE Repealed
  65. 1.1Division 1.1 Repealed
  66. 1.2Division 1.2 Repealed
  67. 1.3Division 1.3 Repealed
  68. METHOD OF DETERMINING THE PROJECTION OF HEADLAMP VISORS AND RIMS Repealed
  69. 2.1Division 2.1 Repealed
  70. METHOD OF DETERMINING THE DISTANCE BETWEEN PARTS OF A GRILLE Repealed
  71. 3.1Division 3.1 Repealed
  72. Annex IIIAnnex III Repealed
  73. Annex IVAnnex IV Repealed

1F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Signature

F1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1SCOPEF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2DEFINITIONSF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.1F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.2F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.3F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.4F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.5F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.6F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.7‘Floor line’ means a line determined as follows:F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.8F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.9F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.1The provisions of this Directive do not apply to these parts of the ‘external surface’ of the vehicle which, with the vehicle unladen, with doors, windows, access lids, etc., in the closed position are either:F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.2F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.3F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.4F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.1.1F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.1.2F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.2.1F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.2.2F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.2.3F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.3GrillesF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.4.1F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.4.2F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.5.1F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.5.2F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.5.3F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.5.4F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.6.1F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.6.2If lateral door handles rotate to operate, they must meet one or other of the following requirements:F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.7Running boardsF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.8Lateral air and rain deflectors and window anti-smear air deflectorsF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.9Sheet metal edgesF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.10.1F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.10.2F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.10.3F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.11.1F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.11.2F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.12F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.1F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.2It must be accompanied by the undermentioned documents in triplicate:F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.3The applicant must submit to the technical service responsible for conducting the approval test:F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6EEC TYPE-APPROVALF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7.1Every modification of the vehicle type or of its external projections forward of the cab's rear panel must be communicated to the administrative department which approved the vehicle type. That department may then either:F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7.2F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.1F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.2F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.3F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.1F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.1F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Annex IIIF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Annex IVF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .