Directive 98/37/EC of the European Parliament and of the Council of 22 June 1998 on the approximation of the laws of the Member States relating to machinery (repealed)
EU Directive 1998/37 · Adopted 22 June 1998 · Extends to United Kingdom
Directive 98/37/EC of the European Parliament and of the Council
of 22 June 1998
on the approximation of the laws of the Member States relating to machinery (repealed)
Contents
- Chapter I: SCOPE, PLACING ON THE MARKET AND FREEDOM OF MOVEMENT Repealed
- 1Article 1 Repealed
- 2Article 2 Repealed
- 3Article 3 Repealed
- 4Article 4 Repealed
- 5Article 5 Repealed
- 6Article 6 Repealed
- 7Article 7 Repealed
- Chapter II: CONFORMITY ASSESSMENT PROCEDURES Repealed
- 8Article 8 Repealed
- 9Article 9 Repealed
- Chapter III: CE MARKING Repealed
- 10Article 10 Repealed
- Chapter IV: FINAL PROVISIONS Repealed
- 11Article 11 Repealed
- 12Article 12 Repealed
- 13Article 13 Repealed
- 14Article 14 Repealed
- 15Article 15 Repealed
- 16Article 16 Repealed
- Annex IESSENTIAL HEALTH AND SAFETY REQUIREMENTS RELATING TO THE DESIGN AND CONSTRUCTION OF MACHINERY AND SAFETY COMPONENTS Repealed
- PRELIMINARY OBSERVATIONS Repealed
- 1Division 1 Repealed
- 2Division 2 Repealed
- 3Division 3 Repealed
- ESSENTIAL HEALTH AND SAFETY REQUIREMENTS Repealed
- General remarks Repealed
- 1.1.1Definitions Repealed
- 1.1.2Principles of safety integration Repealed
- 1.1.3Materials and products Repealed
- 1.1.4Lighting Repealed
- 1.1.5Design of machinery to facilitate its handling Repealed
- Controls Repealed
- 1.2.1Safety and reliability of control systems Repealed
- 1.2.2Control devices Repealed
- 1.2.3Starting Repealed
- Stopping device Repealed
- Normal stopping Repealed
- Emergency stop Repealed
- Complex installations Repealed
- 1.2.5Mode selection Repealed
- 1.2.6Failure of the power supply Repealed
- 1.2.7Failure of the control circuit Repealed
- 1.2.8Software Repealed
- Protection against mechanical hazards Repealed
- 1.3.1Stability Repealed
- 1.3.2Risk of break-up during operation Repealed
- 1.3.3Risks due to falling or ejected objects Repealed
- 1.3.4Risks due to surfaces, edges or angles Repealed
- 1.3.5Risks related to combined machinery Repealed
- 1.3.6Risks relating to variations in the rotational speed of tools Repealed
- 1.3.7Prevention of risks related to moving parts Repealed
- 1.3.8Choice of protection against risks related to moving parts Repealed
- AMoving transmission parts Repealed
- BMoving parts directly involved in the process Repealed
- Required characteristics of guards and protection devices Repealed
- 1.4.1General requirements Repealed
- Special requirements for guards Repealed
- 1.4.2.1Fixed guards Repealed
- Movable guards Repealed
- ADivision A Repealed
- BDivision B Repealed
- 1.4.2.3Adjustable guards restricting access Repealed
- 1.4.3Special requirements for protection devices Repealed
- Protection against other hazards Repealed
- 1.5.1Electricity supply Repealed
- 1.5.2Static electricity Repealed
- 1.5.3Energy supply other than electricity Repealed
- 1.5.4Errors of fitting Repealed
- 1.5.5Extreme temperatures Repealed
- 1.5.6Fire Repealed
- 1.5.7Explosion Repealed
- 1.5.8Noise Repealed
- 1.5.9Vibration Repealed
- 1.5.10Radiation Repealed
- 1.5.11External radiation Repealed
- 1.5.12Laser equipment Repealed
- 1.5.13Emissions of dust, gases, etc. Repealed
- 1.5.14Risk of being trapped in a machine Repealed
- 1.5.15Risk of slipping, tripping or falling Repealed
- Maintenance Repealed
- 1.6.1Machinery maintenance Repealed
- 1.6.2Access to operating position and servicing points Repealed
- 1.6.3Isolation of energy sources Repealed
- 1.6.4Operator intervention Repealed
- 1.6.5Cleaning of internal parts Repealed
- Indicators Repealed
- 1.7.0Information devices Repealed
- 1.7.1Warning devices Repealed
- 1.7.2Warning of residual risks Repealed
- 1.7.3Marking Repealed
- 1.7.4Instructions Repealed
- ESSENTIAL HEALTH AND SAFETY REQUIREMENTS FOR CERTAIN CATEGORIES OF MACHINERY Repealed
- 2.1Agri-foodstuffs machinery Repealed
- Instructions Repealed
- 2.2Portable hand-held and/or hand-guided machinery Repealed
- Instructions Repealed
- 2.3Machinery for working wood and analogous materials Repealed
- 3ESSENTIAL HEALTH AND SAFETY REQUIREMENTS TO OFFSET THE PARTICULAR HAZARDS DUE TO THE MOBILITY OF MACHINERY Repealed
- General Repealed
- 3.1.1Definition Repealed
- 3.1.2Lighting Repealed
- 3.1.3Design of machinery to facilitate its handling Repealed
- Work stations Repealed
- 3.2.1Driving position Repealed
- 3.2.2Seating Repealed
- 3.2.3Other places Repealed
- Controls Repealed
- 3.3.1Control devices Repealed
- 3.3.2Starting/moving Repealed
- 3.3.3Travelling function Repealed
- 3.3.4Movement of pedestrian-controlled machinery Repealed
- 3.3.5Control circuit failure Repealed
- Protection against mechanical hazards Repealed
- 3.4.1Uncontrolled movements Repealed
- 3.4.2Risk of break-up during operation Repealed
- 3.4.3Rollover Repealed
- 3.4.4Falling objects Repealed
- 3.4.5Means of access Repealed
- 3.4.6Towing devices Repealed
- 3.4.7Transmission of power between self-propelled machinery (or tractor) and recipient machinery Repealed
- 3.4.8Moving transmission parts Repealed
- Protection against other hazards Repealed
- 3.5.1Batteries Repealed
- 3.5.2Fire Repealed
- 3.5.3Emissions of dust, gases, etc. Repealed
- Indications Repealed
- 3.6.1Signs and warning Repealed
- 3.6.2Marking Repealed
- 3.6.3Instruction handbook Repealed
- 4ESSENTIAL HEALTH AND SAFETY REQUIREMENTS TO OFFSET THE PARTICULAR HAZARDS DUE TO A LIFTING OPERATION Repealed
- General remarks Repealed
- 4.1.1Definitions Repealed
- Protection against mechanical hazards Repealed
- 4.1.2.1Risks due to lack of stability Repealed
- 4.1.2.2Guide rails and rail tracks Repealed
- 4.1.2.3Mechanical strength Repealed
- 4.1.2.4Pulleys, drums, chains or ropes Repealed
- 4.1.2.5Separate lifting accessories Repealed
- 4.1.2.6Control of movements Repealed
- 4.1.2.7Handling of loads Repealed
- 4.1.2.8Lightning Repealed
- Special requirements for machinery whose power source is other than manual effort Repealed
- Controls Repealed
- 4.2.1.1Driving position Repealed
- 4.2.1.2Seating Repealed
- 4.2.1.3Control devices Repealed
- 4.2.1.4Loading control Repealed
- 4.2.2Installation guided by cables Repealed
- 4.2.3Risks to exposed persons. Means of access to driving position and intervention points Repealed
- 4.2.4Fitness for purpose Repealed
- Marking Repealed
- 4.3.1Chains and ropes Repealed
- 4.3.2Lifting accessories Repealed
- 4.3.3Machinery Repealed
- Instruction handbook Repealed
- 4.4.1Lifting accessories Repealed
- 4.4.2Machinery Repealed
- 5ESSENTIAL HEALTH AND SAFETY REQUIREMENTS FOR MACHINERY INTENDED FOR UNDERGROUND WORK Repealed
- 5.1Risks due to lack of stability Repealed
- 5.2Movement Repealed
- 5.3Lighting Repealed
- 5.4Control devices Repealed
- 5.5Stopping Repealed
- 5.6Fire Repealed
- 5.7Emissions of dust, gases, etc. Repealed
- 6ESSENTIAL HEALTH AND SAFETY REQUIREMENTS TO OFFSET THE PARTICULAR HAZARDS DUE TO THE LIFTING OR MOVING OF PERSONS Repealed
- General Repealed
- 6.1.1Definition Repealed
- 6.1.2Mechanical strength Repealed
- 6.1.3Loading control for types of device moved by power other than human strength Repealed
- Controls Repealed
- 6.2.1Division 6.2.1 Repealed
- 6.2.2Division 6.2.2 Repealed
- 6.2.3Division 6.2.3 Repealed
- Risks of persons falling from the carrier Repealed
- 6.3.1Division 6.3.1 Repealed
- 6.3.2Division 6.3.2 Repealed
- 6.3.3Division 6.3.3 Repealed
- Risks of the carrier falling or overturning Repealed
- 6.4.1Division 6.4.1 Repealed
- 6.4.2Division 6.4.2 Repealed
- 6.5Markings Repealed
- Annex II Repealed
- AContents of the EC declaration of conformity for machinery Repealed
- BContents of the declaration by the manufacturer or his authorised representatives established in the Community (Article 4(2)) Repealed
- CContents of the EC declaration of conformity for safety components placed on the market separately Repealed
- Annex IIICE CONFORMITY MARKING Repealed
- Annex IV: TYPES OF MACHINERY AND SAFETY COMPONENTS FOR WHICH THE PROCEDURE REFERRED TO IN ARTICLE 8(2)(b) AND (c) MUST BE APPLIED Repealed
- Machinery Repealed
- 1Division 1 Repealed
- 1.1Division 1.1 Repealed
- 1.2Division 1.2 Repealed
- 1.3Division 1.3 Repealed
- 1.4Division 1.4 Repealed
- 2Division 2 Repealed
- 3Division 3 Repealed
- 4Division 4 Repealed
- 5Division 5 Repealed
- 6Division 6 Repealed
- 7Division 7 Repealed
- 8Division 8 Repealed
- 9Division 9 Repealed
- 10Division 10 Repealed
- 11Division 11 Repealed
- 12Division 12 Repealed
- 13Division 13 Repealed
- 14Division 14 Repealed
- 15Division 15 Repealed
- 16Division 16 Repealed
- 17Division 17 Repealed
- Safety components Repealed
- 1Division 1 Repealed
- 2Division 2 Repealed
- 3Division 3 Repealed
- 4Division 4 Repealed
- 5Division 5 Repealed
- Annex VEC DECLARATION OF CONFORMITY Repealed
- 1Division 1 Repealed
- 2Division 2 Repealed
- 3Division 3 Repealed
- 4Division 4 Repealed
- Annex VIEC TYPE-EXAMINATION Repealed
- 1Division 1 Repealed
- 2Division 2 Repealed
- 3Division 3 Repealed
- 4Division 4 Repealed
- 5Division 5 Repealed
- 6Division 6 Repealed
- 7Division 7 Repealed
- Annex VIIMINIMUM CRITERIA TO BE TAKEN INTO ACCOUNT BY MEMBER STATES FOR THE NOTIFICATION OF BODIES Repealed
- 1Division 1 Repealed
- 2Division 2 Repealed
- 3Division 3 Repealed
- 4Division 4 Repealed
- 5Division 5 Repealed
- 6Division 6 Repealed
- 7Division 7 Repealed
- Annex VIII Repealed
- ARepealed Directives Repealed
- BList of deadlines for transposition into and application in national law Repealed
- Annex IXAnnex IX Repealed