OpenLegislation

Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity (repealed)

EU Directive 1999/5 · Adopted 9 March 1999 · Extends to United Kingdom

Original text. legislation.gov.uk does not revise this item, so later amendments are not shown here. Changes made to it are listed under each provision when known.

Directive 1999/5/EC of the European Parliament and of the Council

of 9 March 1999

on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity (repealed)

F1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Annotations to the whole text

Textual amendments

F1

Repealed by Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC Text with EEA relevance.

Contents

  1. Chapter I: GENERAL ASPECTS Repealed
  2. 1Scope and aim Repealed
  3. 2Definitions Repealed
  4. 3Essential requirements Repealed
  5. 4Notification and publication of interface specifications Repealed
  6. 5Harmonised standards Repealed
  7. 6Placing on the market Repealed
  8. 7Putting into service and right to connect Repealed
  9. 8Free movement of apparatus Repealed
  10. 9Safeguards Repealed
  11. Chapter II: CONFORMITY ASSESSMENT Repealed
  12. 10Conformity assessment procedures Repealed
  13. 11Notified bodies and surveillance authorities Repealed
  14. Chapter III: CE CONFORMITY MARKING AND INSCRIPTIONS Repealed
  15. 12CE marking Repealed
  16. Chapter IV: THE COMMITTEE Repealed
  17. 13Constitution of the Committee Repealed
  18. 14Advisory committee procedure Repealed
  19. 15Regulatory committee procedure Repealed
  20. 15aRegulatory procedure with scrutiny Repealed
  21. Chapter V: FINAL AND TRANSITIONAL PROVISIONS Repealed
  22. 16Third countries Repealed
  23. 17Review and reporting Repealed
  24. 18Transitional provisions Repealed
  25. 19Transposition Repealed
  26. 20Repeal Repealed
  27. 21Entry into force Repealed
  28. 22Addressees Repealed
  29. Annex IEQUIPMENT NOT COVERED BY THIS DIRECTIVE AS REFERRED TO IN ARTICLE 1(4) Repealed
  30. Annex II: CONFORMITY ASSESSMENT PROCEDURE REFERRED TO IN ARTICLE 10(3) Repealed
  31. 1Division 1 Repealed
  32. 2Division 2 Repealed
  33. 3Division 3 Repealed
  34. 4The technical documentation must enable the conformity of the product with the essential requirements to be assessed. It must cover the design, manufacture and operation of the product, in particular: Repealed
  35. 5Division 5 Repealed
  36. 6Division 6 Repealed
  37. Annex IIICONFORMITY ASSESSMENT PROCEDURE REFERRED TO IN ARTICLE 10(4) Repealed
  38. Annex IVCONFORMITY ASSESSMENT PROCEDURE REFERRED TO IN ARTICLE 10(5) Repealed
  39. Annex V: CONFORMITY ASSESSMENT PROCEDURE REFERRED TO IN ARTICLE 10 Repealed
  40. 1Division 1 Repealed
  41. 2Division 2 Repealed
  42. Quality system Repealed
  43. 3.1Division 3.1 Repealed
  44. 3.2Division 3.2 Repealed
  45. 3.3Division 3.3 Repealed
  46. 3.4Division 3.4 Repealed
  47. EC surveillance under the responsibility of the notified body Repealed
  48. 4.1Division 4.1 Repealed
  49. 4.2Division 4.2 Repealed
  50. 4.3Division 4.3 Repealed
  51. 4.4Division 4.4 Repealed
  52. 5Division 5 Repealed
  53. 6Division 6 Repealed
  54. Annex VI: MINIMUM CRITERIA TO BE TAKEN INTO ACCOUNT BY MEMBER STATES WHEN DESIGNATING NOTIFIED BODIES IN ACCORDANCE WITH ARTICLE 11(1) Repealed
  55. 1Division 1 Repealed
  56. 2Division 2 Repealed
  57. 3Division 3 Repealed
  58. 4The staff responsible for inspections must have: Repealed
  59. 5Division 5 Repealed
  60. 6Division 6 Repealed
  61. 7Division 7 Repealed
  62. Annex VII: MARKING OF EQUIPMENT REFERRED TO IN ARTICLE 12(1) Repealed
  63. 1Division 1 Repealed
  64. 2Division 2 Repealed
  65. 3Division 3 Repealed
  66. 4Division 4 Repealed
  67. 5Division 5 Repealed

1Scope and aimF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2DefinitionsF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3Essential requirementsF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4Notification and publication of interface specificationsF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5Harmonised standardsF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6Placing on the marketF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7Putting into service and right to connectF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8Free movement of apparatusF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9SafeguardsF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

10Conformity assessment proceduresF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

11Notified bodies and surveillance authoritiesF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

12CE markingF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

13Constitution of the CommitteeF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

14Advisory committee procedureF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

15Regulatory committee procedureF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

15aRegulatory procedure with scrutinyF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

16Third countriesF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

17Review and reportingF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

18Transitional provisionsF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

19TranspositionF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

20RepealF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

21Entry into forceF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

22AddresseesF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Annex IEQUIPMENT NOT COVERED BY THIS DIRECTIVE AS REFERRED TO IN ARTICLE 1(4)F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4The technical documentation must enable the conformity of the product with the essential requirements to be assessed. It must cover the design, manufacture and operation of the product, in particular:F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Annex IIICONFORMITY ASSESSMENT PROCEDURE REFERRED TO IN ARTICLE 10(4)F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Annex IVCONFORMITY ASSESSMENT PROCEDURE REFERRED TO IN ARTICLE 10(5)F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.1F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.2F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.3F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.4F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.1F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.2F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.3F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.4F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4The staff responsible for inspections must have:F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .