OpenLegislation

Division 3.2.3 F1

United Kingdom

Original text. Later amendments are not shown.

It is important that not only the draughts in the intact condition are verified, but also that the draughts of the damaged model are accurately measured for correlation with those derived from the damaged stability calculation. For practical reasons a tolerance of + 2 mm in any draught is accepted.

Annotations

Textual amendments

F1

Substituted by Commission Directive 2005/12/EC of 18 February 2005 amending Annexes I and II to Directive 2003/25/EC of the European Parliament and of the Council on specific stability requirements for ro-ro passenger ships (Text with EEA relevance).