Directive 2005/66/EC of the European Parliament and of the Council of 26 October 2005 relating to the use of frontal protection systems on motor vehicles and amending Council Directive 70/156/EEC (repealed)
EU Directive 2005/66 · Adopted 26 October 2005 · Extends to United Kingdom
Directive 2005/66/EC of the European Parliament and of the Council
of 26 October 2005
relating to the use of frontal protection systems on motor vehicles and amending Council Directive 70/156/EEC (repealed)
F1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Annotations to the whole text
Textual amendments
Contents
- 1Subject matter Repealed
- 2Definitions Repealed
- 3Type-approval provisions Repealed
- 4Implementation measures and amendments Repealed
- 5Review Repealed
- 6Amendments to Directive 70/156/EEC Repealed
- 7Transposition Repealed
- 8Separate technical units Repealed
- 9Entry into force Repealed
- 10Addressees Repealed
- Annex I: TECHNICAL PROVISIONS Repealed
- 1DEFINITIONS Repealed
- 1.1‘Vehicle type’ means a category of motor vehicle which, forward of the A-pillars, does not differ in such essential respects as: Repealed
- 1.2Division 1.2 Repealed
- 1.3Division 1.3 Repealed
- 1.4Division 1.4 Repealed
- 1.5‘extreme outer edge’ of the vehicle means, in relation to the sides of the vehicle, the plane parallel to the median longitudinal plane of the vehicle coinciding with its outer lateral edge, and, in relation to the front and rear ends, the perpendicular transverse plane of the vehicle coinciding with its outer front and rear edges, account not being taken of the projection: Repealed
- 1.6Division 1.6 Repealed
- 1.7Division 1.7 Repealed
- 1.8Division 1.8 Repealed
- 1.9Division 1.9 Repealed
- 1.10Division 1.10 Repealed
- 1.11Division 1.11 Repealed
- 1.12Division 1.12 Repealed
- 1.13Division 1.13 Repealed
- 1.14Division 1.14 Repealed
- 1.15‘Head performance criterion (HPC)’ shall be calculated using the expression: Repealed
- CONSTRUCTION AND INSTALLATION PROVISIONS Repealed
- 2.1Frontal protection systems Repealed
- 2.1.1Division 2.1.1 Repealed
- 2.1.2Division 2.1.2 Repealed
- 2.1.3Division 2.1.3 Repealed
- 2.1.4Division 2.1.4 Repealed
- 2.1.5Division 2.1.5 Repealed
- 2.1.6Division 2.1.6 Repealed
- 2.1.7Division 2.1.7 Repealed
- 2.1.8Division 2.1.8 Repealed
- 2.1.9Division 2.1.9 Repealed
- 2.2Division 2.2 Repealed
- TEST PROVISIONS Repealed
- 3.1Division 3.1 Repealed
- 3.1.1Division 3.1.1 Repealed
- 3.1.1.1Division 3.1.1.1 Repealed
- 3.1.1.1.1Division 3.1.1.1.1 Repealed
- 3.1.1.1.2Division 3.1.1.1.2 Repealed
- 3.1.1.2Division 3.1.1.2 Repealed
- 3.1.2Upper Legform to Frontal Protection System. The test is performed at an impact speed of 40 km/h. The instantaneous sum of the impact forces with respect to time shall not exceed 7,5 kN and the bending moment on the test impactor shall not exceed 510 Nm. Repealed
- 3.1.2.1Division 3.1.2.1 Repealed
- 3.1.2.1.1Division 3.1.2.1.1 Repealed
- 3.1.2.1.2Division 3.1.2.1.2 Repealed
- 3.1.2.2Division 3.1.2.2 Repealed
- 3.1.3Division 3.1.3 Repealed
- 3.1.4Division 3.1.4 Repealed
- Annex II: ADMINISTRATIVE PROVISIONS FOR TYPE-APPROVAL Repealed
- APPLICATION FOR EC TYPE-APPROVAL Repealed
- 1.1Division 1.1 Repealed
- 1.1.1Division 1.1.1 Repealed
- 1.1.2Division 1.1.2 Repealed
- 1.2Division 1.2 Repealed
- 1.2.1Division 1.2.1 Repealed
- 1.2.2Division 1.2.2 Repealed
- GRANTING OF EC TYPE-APPROVAL Repealed
- 2.1Models of the EC type-approval certificates, pursuant to Article 4(3) and, if applicable, 4(4) of Directive 70/156/EEC, are provided in: Repealed
- EC TYPE-APPROVAL MARK Repealed
- 3.1Division 3.1 Repealed
- 3.2Division 3.2 Repealed
- 3.2.1A rectangle surrounding the letter ‘e’ followed by the distinguishing number or letters of the Member State which has granted type-approval: Repealed
- 3.2.2In the vicinity of the rectangle the ‘base approval number’ contained in section 4 of the type-approval number referred to in Annex VII of Directive 70/156/EEC, preceded by the two figures indicating the sequence number assigned to the most recent major technical amendment to this Directive on the date the EC type-approval was granted. In this Directive the sequence number is 01. Repealed
- 3.3Division 3.3 Repealed
- 3.4Division 3.4 Repealed
- 1INFORMATION DOCUMENT No […] Repealed
- 2INFORMATION DOCUMENT No […] Repealed
- 3(MODEL) Repealed
- Addendumto EC type-approval certificate No […] Repealed
- 4(MODEL) Repealed
- 5Appendix 5 Repealed
- Annex IIIAMENDMENTS TO DIRECTIVE 70/156/EEC Repealed
1Subject matterF1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2DefinitionsF1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3Type-approval provisionsF1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4Implementation measures and amendmentsF1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5ReviewF1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6Amendments to Directive 70/156/EECF1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7TranspositionF1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8Separate technical unitsF1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9Entry into forceF1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10AddresseesF1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1DEFINITIONSF1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.1‘Vehicle type’ means a category of motor vehicle which, forward of the A-pillars, does not differ in such essential respects as:F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.3F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.4F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.5‘extreme outer edge’ of the vehicle means, in relation to the sides of the vehicle, the plane parallel to the median longitudinal plane of the vehicle coinciding with its outer lateral edge, and, in relation to the front and rear ends, the perpendicular transverse plane of the vehicle coinciding with its outer front and rear edges, account not being taken of the projection:F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.6F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.7F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.8F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.9F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.10F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.11F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.12F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.13F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.14F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.15‘Head performance criterion (HPC)’ shall be calculated using the expression:F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.1Frontal protection systemsF1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.1.1F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.1.2F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.1.3F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.1.4F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.1.5F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.1.6F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.1.7F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.1.8F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.1.9F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.2F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.1F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.1.1F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.1.1.1F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.1.1.1.1F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.1.1.1.2F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.1.1.2F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.1.2Upper Legform to Frontal Protection System. The test is performed at an impact speed of 40 km/h. The instantaneous sum of the impact forces with respect to time shall not exceed 7,5 kN and the bending moment on the test impactor shall not exceed 510 Nm.F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.1.2.1F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.1.2.1.1F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.1.2.1.2F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.1.2.2F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.1.3F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.1.4F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.1F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.1.1F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.1.2F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.1F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.1Models of the EC type-approval certificates, pursuant to Article 4(3) and, if applicable, 4(4) of Directive 70/156/EEC, are provided in:F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.1F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.2F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.2.1A rectangle surrounding the letter ‘e’ followed by the distinguishing number or letters of the Member State which has granted type-approval:F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.2.2In the vicinity of the rectangle the ‘base approval number’ contained in section 4 of the type-approval number referred to in Annex VII of Directive 70/156/EEC, preceded by the two figures indicating the sequence number assigned to the most recent major technical amendment to this Directive on the date the EC type-approval was granted. In this Directive the sequence number is 01.F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.3F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.4F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1INFORMATION DOCUMENT No […]F1
Pursuant to Annex I of Council Directive 70/156/EEC relating to EC type-approval of vehicles with respect to the provision of frontal protection systems
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.
GENERAL
0.1.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.2.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.3.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.3.1.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.4.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.5.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.8.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.
GENERAL CONSTRUCTION CHARACTERISTICS OF THE VEHICLE
1.1.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.
MASSES AND DIMENSIONS (in kg and mm)
(Refer to drawings where applicable)
2.8.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.8.1.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9.
BODYWORK
9.1.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9.[11].
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9.[11].1.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9.[11].2.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9.[11].3.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9.[11].4.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9.[11].5
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2INFORMATION DOCUMENT No […]F1
Relating to EC type approval of frontal protection systems as separate technical units (2005/66/EC)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.
GENERAL
0.1.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.2.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.5.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.7.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.
DESCRIPTION OF THE DEVICE
1.1.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.3.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.4
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3(MODEL)F1
EC TYPE-APPROVAL CERTIFICATE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION I
0.1.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.2.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.3.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.3.1.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.4.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.5.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.7.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.8.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION II
1.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Addendumto EC type-approval certificate No […]F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.
Annex I, paragraph 3, test results
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4(MODEL)F1
EC TYPE-APPROVAL CERTIFICATE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION I
0.1.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.2.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.3.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.3.1.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.5.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.7.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.8.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION II
1.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5F1
Example of the EC type-approval mark
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Annex IIIAMENDMENTS TO DIRECTIVE 70/156/EECF1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .