Directive of the European Parliament and of the Council of 12 December 2006 laying down technical requirements for inland waterway vessels and repealing Council Directive 82/714/EEC (2006/87/EC) (repealed)
EU Directive 2006/87 · Adopted 12 December 2006 · Extends to United Kingdom
Directive of the European Parliament and of the Council
of 12 December 2006
laying down technical requirements for inland waterway vessels and repealing Council Directive 82/714/EEC
(2006/87/EC) (repealed)
F1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Annotations to the whole text
Textual amendments
Contents
- 1Classification of waterways Repealed
- 2Scope of application Repealed
- 3Obligation to carry a certificate Repealed
- 4Supplementary Community inland navigation certificates Repealed
- 5Additional or reduced technical requirements for certain zones Repealed
- 6Dangerous goods Repealed
- 7Derogations Repealed
- 8Issuance of Community inland navigation certificates Repealed
- 9Competent authorities Repealed
- 10Carrying out of technical inspections Repealed
- 11Validity of Community inland navigation certificates Repealed
- 12Replacement of Community inland navigation certificates Repealed
- 13Renewal of Community inland navigation certificates Repealed
- 14Extension of validity of Community inland navigation certificates Repealed
- 15Issuance of new Community inland navigation certificates Repealed
- 16Refusal to issue or renew, and withdrawal of, Community inland navigation certificates Repealed
- 17Additional inspections Repealed
- 18Recognition of navigability certificates of craft from third countries Repealed
- 19Committee procedure Repealed
- 20Adaptation of the Annexes and recommendations on provisional certificates Repealed
- 21Continued applicability of Directive 76/135/EEC Repealed
- 22National additional or reduced requirements Repealed
- 23Transposition Repealed
- 24Penalties Repealed
- 25Repeal of Directive 82/714/EEC Repealed
- 26Entry into force Repealed
- 27Addressees Repealed
- Annex I: LIST OF COMMUNITY INLAND WATERWAYS DIVIDED GEOGRAPHICALLY INTO ZONES 1, 2, 3 AND 4 Repealed
- Chapter 1 Repealed
- Zone 1 Repealed
- Federal Republic of Germany Repealed
- Republic of Poland Repealed
- United Kingdom of Great Britain and Northern Ireland Repealed
- Zone 2 Repealed
- Czech Republic Repealed
- Federal Republic of Germany Repealed
- French Republic Repealed
- Republic of Hungary Repealed
- Kingdom of the Netherlands Repealed
- Republic of Poland Repealed
- United Kingdom of Great Britain and Northern Ireland Repealed
- Chapter 2 Repealed
- Zone 3 Repealed
- Kingdom of Belgium Repealed
- Republic of Bulgaria Repealed
- Czech Republic Repealed
- Federal Republic of Germany Repealed
- French Republic Repealed
- Republic of Croatia Repealed
- Republic of Hungary Repealed
- Kingdom of the Netherlands Repealed
- Republic of Austria Repealed
- Republic of Poland Repealed
- —Division — Repealed
- —Division — Repealed
- —Division — Repealed
- —Division — Repealed
- —Division — Repealed
- —Division — Repealed
- —Division — Repealed
- —Division — Repealed
- —Division — Repealed
- —Division — Repealed
- —Division — Repealed
- —Division — Repealed
- —Division — Repealed
- —Division — Repealed
- —Division — Repealed
- —Division — Repealed
- —Division — Repealed
- —Division — Repealed
- —Division — Repealed
- —Division — Repealed
- —Division — Repealed
- —Division — Repealed
- —Division — Repealed
- —Division — Repealed
- —Division — Repealed
- —Division — Repealed
- Romania Repealed
- Slovak Republic Repealed
- United Kingdom of Great Britain and Northern Ireland Repealed
- Chapter 3 Repealed
- Zone 4 Repealed
- Kingdom of Belgium Repealed
- Czech Republic Repealed
- Federal Republic of Germany Repealed
- French Republic Repealed
- Republic of Croatia Repealed
- Italian Republic Repealed
- Republic of Lithuania Repealed
- Grand Duchy of Luxembourg Repealed
- Republic of Hungary Repealed
- Kingdom of the Netherlands Repealed
- Republic of Austria Repealed
- Republic of Poland Repealed
- Romania Repealed
- Slovak Republic Repealed
- United Kingdom of Great Britain and Northern Ireland Repealed
- Annex IIISUBJECTS FOR POSSIBLE ADDITIONAL TECHNICAL REQUIREMENTS APPLICABLE TO VESSELS ON INLAND WATERWAYS OF ZONES 1 AND 2 Repealed
- Annex IVSUBJECTS FOR POSSIBLE REDUCTIONS OF THE TECHNICAL REQUIREMENTS APPLICABLE TO VESSELS ON INLAND WATERWAYS OF ZONES 3 AND 4 Repealed
- Annex V: MODEL COMMUNITY INLAND NAVIGATION CERTIFICATES Repealed
- Part I: MODEL COMMUNITY INLAND NAVIGATION CERTIFICATE Repealed
- Repealed
- Part II: MODEL SUPPLEMENTARY COMMUNITY INLAND NAVIGATION CERTIFICATE Repealed
- Repealed
- Part III: MODEL PROVISIONAL COMMUNITY INLAND NAVIGATION CERTIFICATE Repealed
- Annex VIMODEL REGISTER OF COMMUNITY INLAND NAVIGATION CERTIFICATES Repealed
- Annex VII: CLASSIFICATION SOCIETIES Repealed
- ICriteria for the approval of classification societies Repealed
- IIProcedure for the approval of classification societies Repealed
- IIIList of approved classification societies Repealed
- Annex VIII: RULES OF PROCEDURE FOR THE CARRYING OUT OF INSPECTIONS Repealed
- 1Article 1 Repealed
- 2Article 2 Repealed
- 3Article 3 Repealed
- 4Article 4 Repealed
- Annex IXRADAR EQUIPMENT AND RATE-OF-TURN INDICATORS USED ON BOARD INLAND WATERWAY VESSELS Repealed
- Minimum requirements and test conditions for radar installations used for navigation on board inland waterway vessels Repealed
- Article 1Scope Repealed
- Article 2Purpose of the radar navigation equipment Repealed
- Minimum requirements Repealed
- 1Division 1 Repealed
- 2Division 2 Repealed
- Type tests Repealed
- 1Division 1 Repealed
- 2Division 2 Repealed
- Application for a type test Repealed
- 1Applications for a type test of a radar navigation installation shall be submitted to a technical service. Repealed
- 2Each application shall be accompanied by the following documents: Repealed
- 3Division 3 Repealed
- Type-approval Repealed
- 1Division 1 Repealed
- 2Each competent authority or the technical service designated by the competent authority shall be entitled to select equipment from the production series at any time for inspection. Repealed
- Marking of the equipment and type approval number Repealed
- 1Each component of the equipment shall be marked indelibly with Repealed
- 2The type-approval number assigned by the competent authority shall be affixed indelibly to the display unit in such a way that it remains clearly visible after the equipment has been installed. Repealed
- 3The type-approval number shall be used only in conjunction with the associated type-approval. Repealed
- Article 8Manufacturer’s declaration Repealed
- Modifications to type-approved equipment Repealed
- 1Division 1 Repealed
- 2The competent authority shall decide following consultation with the technical service whether the type-approval still applies or whether an inspection or new type test is necessary. Repealed
- Minimum requirements and test conditions for rate-of-turn indicators used on board inland waterway vessels Repealed
- Table of contents Repealed
- General Repealed
- General minimum requirements for rate-of-turn indicators Repealed
- Minimum operational requirements for rate-of-turn indicators Repealed
- Minimum technical requirements for rate-of-turn indicators Repealed
- Test conditions and procedures for rate-of-turn indicators Repealed
- General Repealed
- Article 1.01Scope Repealed
- Article 1.02Purpose of the rate-of-turn indicator Repealed
- Type test Repealed
- 1Division 1 Repealed
- 2Division 2 Repealed
- Application for a type test Repealed
- 1Applications for a type test of a rate-of-turn indicator shall be submitted to a technical service. Repealed
- 2Each application shall be accompanied by the following documents: Repealed
- 3By means of tests, the applicant shall establish or have it established that the equipment meets the minimum requirements of these provisions. Repealed
- Type approval Repealed
- 1Type approval shall be granted by the competent authority pursuant to the test certificate. Repealed
- 2Each competent authority or the technical service designated by the competent authority shall be entitled to select equipment from the production series at any time for inspection. Repealed
- Marking of the equipment and type approval number Repealed
- 1Each component of the equipment shall be marked indelibly with Repealed
- 2The type-approval number assigned by the competent authority shall be affixed indelibly to the control unit in such a way that it remains clearly visible after the equipment has been installed. Repealed
- 3The type-approval number shall be used only in conjunction with the associated type-approval. Repealed
- Article 1.07Manufacturer’s declaration Repealed
- Modifications to type-approved equipment Repealed
- 1Any modification made to equipment already approved shall cause the type-approval to be withdrawn. Repealed
- 2The competent authority shall decide following consultation with the technical service whether the type-approval still applies or whether an inspection or new type test is necessary. Repealed
- General minimum requirements for rate-of-turn indicators Repealed
- Construction, design Repealed
- 1Division 1 Repealed
- 2Division 2 Repealed
- 3In the absence of any specific provision in Annex II or in this Annex, the requirements and test methods contained in European Standard EN 60945:2002 shall apply to power supply, safety, mutual interference of ship borne equipment, compass safe distance, resistance to climatic influences, mechanical strength, environmental influences, audible noise emission and equipment markings. Repealed
- Spurious emissions and electromagnetic compatibility Repealed
- 1General requirements: Repealed
- 2Spurious emissions: Repealed
- Operation Repealed
- 1The equipment shall not have more controls than are necessary for its correct operation. Repealed
- 2All controls and indicators shall be provided with symbols or markings in English. Symbols shall meet the requirements of European Standard EN 60417:1998. Repealed
- 3Division 3 Repealed
- 4Division 4 Repealed
- Article 2.04Operating instructions Repealed
- Article 2.05Installation of the sensor Repealed
- Minimum operational requirements for rate-of-turn indicators Repealed
- Operational readiness of the rate-of-turn indicator Repealed
- 1Division 1 Repealed
- 2Division 2 Repealed
- 3Division 3 Repealed
- Indication of the rate of turn Repealed
- 1Division 1 Repealed
- 2The indicator scale shall be at least 20 cm long and may be circular or rectilinear. Repealed
- 3Division 3 Repealed
- Article 3.03Measuring ranges Repealed
- Article 3.04Accuracy of the indicated rate of turn Repealed
- Article 3.05Sensitivity Repealed
- Monitoring of operation Repealed
- 1Division 1 Repealed
- 2Division 2 Repealed
- Insensitivity to normal movements of the vessel Repealed
- 1Division 1 Repealed
- 2Division 2 Repealed
- Article 3.08Insensitivity to magnetic fields Repealed
- Article 3.09Slave indicators Repealed
- Minimum technical requirements for rate-of-turn indicators Repealed
- Operation Repealed
- 1Division 1 Repealed
- 2Division 2 Repealed
- 3Division 3 Repealed
- 4Division 4 Repealed
- Damping devices Repealed
- 1Division 1 Repealed
- 2The indicator shall be damped for critical values. Repealed
- Connection of additional equipment Repealed
- 1If the rate-of-turn indicator can be connected to slave indicators or similar equipment, the rate-of-turn indication shall remain usable as an analogue electric signal. In addition, the rate-of-turn indicator may possess a digital interface in accordance with (2). Repealed
- 2Division 2 Repealed
- 3An external alarm switch shall be provided. The switch shall be installed as a galvanic insulation break-switch for the indicator. Repealed
- Test conditions and procedures for rate-of-turn indicators Repealed
- Article 5.01Safety, load capacity and electromagnetic compatibility Repealed
- Article 5.02Spurious emissions Repealed
- Test procedure Repealed
- 1Rate-of-turn indicators shall be tested under nominal and boundary conditions. In this regard, the influence of the operating voltage and of the ambient temperature shall be tested as far as the prescribed limit value. Repealed
- 2Division 2 Repealed
- 3Division 3 Repealed
- Appendix Repealed
- Requirements for installation and performance tests for radar equipment and rate-of-turn indicators used on board inland waterway vessels Repealed
- General Repealed
- 1Division 1 Repealed
- 2Only equipment approved with: Repealed
- Approved specialised firms Repealed
- 1The installation, replacement, repair or maintenance of radar navigation equipment and rate-of-turn indicators shall be carried out only by specialised firms approved by the competent authority. Repealed
- 2Division 2 Repealed
- 3Division 3 Repealed
- Article 3Requirements for on-board power supply Repealed
- Installation of the radar antenna Repealed
- 1Division 1 Repealed
- 2Division 2 Repealed
- Installation of the display unit and the control unit Repealed
- 1Division 1 Repealed
- 2Division 2 Repealed
- 3Division 3 Repealed
- 4Division 4 Repealed
- Installation of the rate-of-turn indicator Repealed
- 1Division 1 Repealed
- 2Division 2 Repealed
- 3Division 3 Repealed
- Article 7Installation of the position sensor Repealed
- Article 8Installation and performance test Repealed
- Article 9Installation and performance certificate Repealed
- PART IV(MODEL) Repealed
- (MODEL) Repealed
- 1Register of competent authorities for type approval of radar navigation equipment and rate-of-turn indicators Repealed
- Register of approved radar navigation equipment and rate-of-turn indicators Repealed
- Register of radar navigation equipment and rate-of-turn indicators approved on the basis of equivalent type-approvals Repealed
- Register of specialised firms approved for the installation or replacement of radar navigation equipment and rate-of-turn indicators Repealed
- Register of testing establishments specified for the type testing of radar navigation equipment and rate-of-turn indicators Repealed
- Equivalent equipment Repealed
- (1)Division (1) Repealed
- (2)Division (2) Repealed
- (3)Division (3) Repealed