OpenLegislation

Directive 2009/139/EC of the European Parliament and of the Council of 25 November 2009 on statutory markings for two- or three-wheel motor vehicles (codified version) (Text with EEA relevance) (repealed)

EU Directive 2009/139 · Adopted 25 November 2009 · Extends to United Kingdom

Original text. legislation.gov.uk does not revise this item, so later amendments are not shown here. Changes made to it are listed under each provision when known.

Directive 2009/139/EC of the European Parliament and of the Council

of 25 November 2009

on statutory markings for two- or three-wheel motor vehicles

(codified version)

(Text with EEA relevance) (repealed)

F1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Annotations to the whole text

Textual amendments

F1

Repealed by Regulation (EU) No 168/2013 of the European Parliament and of the Council of 15 January 2013 on the approval and market surveillance of two- or three-wheel vehicles and quadricycles Text with EEA relevance.

Contents

  1. 1Article 1 Repealed
  2. 2Article 2 Repealed
  3. 3Article 3 Repealed
  4. 4Article 4 Repealed
  5. 5Article 5 Repealed
  6. 6Article 6 Repealed
  7. 7Article 7 Repealed
  8. Signature
  9. Annex I: REQUIREMENTS CONCERNING STATUTORY MARKINGS FOR TWO- OR THREE-WHEEL MOTOR VEHICLES Repealed
  10. GENERAL Repealed
  11. 1.1Division 1.1 Repealed
  12. MANUFACTURER’S DATA PLATE Repealed
  13. 2.1A manufacturer’s data plate, an example of which is shown in Appendix 1, must be firmly attached, at an easily accessible point, to a part which is normally not likely to be replaced during use; it must be easily legible and contain the following information in an indelible form, in the following order: Repealed
  14. 2.2Division 2.2 Repealed
  15. 2.3Division 2.3 Repealed
  16. 3VEHICLE IDENTIFICATION NUMBER Repealed
  17. CHARACTERS Repealed
  18. 4.1Division 4.1 Repealed
  19. 4.2In the vehicle identification number: Repealed
  20. 1Example of manufacturer’s data plate Repealed
  21. 2Appendix 2 Repealed
  22. 3Appendix 3 Repealed
  23. Annex II Repealed
  24. APart A Repealed
  25. BPart B Repealed
  26. Annex IIIAnnex III Repealed

1F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Signature

F1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.1F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.1A manufacturer’s data plate, an example of which is shown in Appendix 1, must be firmly attached, at an easily accessible point, to a part which is normally not likely to be replaced during use; it must be easily legible and contain the following information in an indelible form, in the following order:F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.2F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.3F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3VEHICLE IDENTIFICATION NUMBERF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.1F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.2In the vehicle identification number:F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1Example of manufacturer’s data plateF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2F1

Information document in respect of the statutory markings for a type of two- or three-wheel motor vehicle

(to be attached to the application for EC component type-approval if this is submitted separately from the application for an EC vehicle type-approval)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

EC component type-approval certificate in respect of statutory markings for a type of two- or three-wheel motor vehicles

MODEL

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.

Manufacturer’s name and address: …

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.

Name and address of manufacturer’s representative (if any): …

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

AF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

BF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Annex IIIF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .