OpenLegislation

Division 11 The table to Article 24.02(2) is amended as follows:

United Kingdom

Original text. Later amendments are not shown.

  1. (a)

    The entry relating to Article 7.02, paragraph 5 becomes the entry relating to Article 7.02 paragraph 6.

  2. (b)

    The following entries are inserted after the entry relating to Article 7.04, paragraph 2:

    ‘

    paragraph 3DisplayIf there is no wheelhouse designed for radar navigation by one person: NRC, at the latest on issue or renewal of the Community certificate after 1.1.2010
    paragraph 9, third sentenceControl by a leverNRC, at the latest on issue or renewal of the Community certificate after 1.1.2010
    fourth sentenceClearly show the direction of the thrustNRC, at the latest on issue or renewal of the Community certificate after 1.1.2010

    ’

  3. (c)

    The entry relating to Article 8.02, paragraph 4 is replaced by the following:

    ‘

    paragraph 4Screening of pipe connectionsNRC, at the latest on issue or renewal of the Community certificate after 1.1.2025

    ’

  4. (d)

    The following entries are inserted after the entry relating to Article 8.02, paragraph 4:

    ‘

    paragraph 5Jacketed piping systemNRC, at the latest on issue or renewal of the Community certificate after 1.1.2025
    paragraph 6Insulation of engine partsNRC, at the latest on issue or renewal of the Community certificate

    ’

  5. (e)

    The entry relating to Article 8.05, paragraph 9 first sentence becomes the entry to Article 8.05, paragraph 9 second sentence.

  6. (f)

    The following entries are inserted after the entry relating to Article 8.05, paragraph 13:

    ‘

    8.06Tanks for lubricating oil, pipes and accessoriesNRC, at the latest on issue or renewal of the Community certificate after 1.1.2045
    8.07Tanks for oils in power transmission systems, control and activating systems and heating systems, pipes and accessoriesNRC, at the latest on issue or renewal of the Community certificate after 1.1.2045

    ’

  7. (g)

    The entry relating to Chapter 8a is replaced by the following:

    ‘

    CHAPTER 8a
    8a.02(2) and (3)Compliance with the requirements/exhaust gas emission limit values

    The regulations do not apply:

    1. (a)

      for engines, which were installed before 1.1.2003; and

    2. (b)

      for exchange engines, which up to 31.12.2011 are installed on board craft which were in operation on 1.1.2002.

    For engines which were installed:

    1. (a)

      in craft between 1.1.2003 and 1.7.2007 the exhaust gas limit values as referred to in Annex XIV of Directive 97/68 apply;

    2. (b)

      in craft or in on-board machinery after 30.6.2007 the exhaust gas limit values as referred to in Annex XV of Directive 97/68 apply.

    The requirements for the categories:

    1. (aa)

      V for propulsion engines and for auxiliary engines above 560 kW; and

    2. (bb)

      D, E, F, G, H, I, J, K for auxiliary engines of Directive 97/68/EC apply as equivalent.

    ’

  8. (h)

    The entry relating to Article 9.15, paragraph 9 becomes the entry to Article 9.15, paragraph 10.

  9. (i)

    The following entry is inserted after the title ‘Chapter 15’:

    ‘

    15.01(1)(c)Non-application of Article 8.08(2), second sentenceNRC, at the latest on issue or renewal of the Community certificate after 1.1.2007

    ’

  10. (j)

    The entry relating to Article 15.01, paragraph 1(d) is replaced by the following:

    ‘

    (d)Non-application of Article 9.14 Paragraph 3 second sentence for rated voltages of over 50 VNRC, at the latest on issue or renewal of the Community certificate after 1.1.2010

    ’