Division 12 The table to Article 24.06(5) is amended as follows:
United Kingdom
- (a)
The following entries are inserted after the entry related to Article 7.02(2):
‘
7.04(3) Display If there is no wheelhouse designed for radar navigation by one person: NRC, at the latest on issue or renewal of the Community certificate after 1.1.2010 1.4.2007 paragraph 9, third sentence Control by a lever NRC, at the latest on issue or renewal of the Community certificate after 1.1.2010 1.4.2007 fourth sentence Prohibition of indicating the direction of the jet NRC, at the latest on issue or renewal of the Community certificate after 1.1.2010 1.4.2007 ’
- (b)
The entry relating to Article 8.02(4) is replaced by the following:
‘
8.02(4) Screening of pipe connections NRC, at the latest on issue or renewal of the Community certificate after 2025 1.4.2007 ’
- (c)
The following entries are inserted after the entry relating to Article 8.02(4):
‘
paragraph 5 Jacketed piping system NRC, at the latest on issue or renewal of the Community certificate after 1.1.2025 1.4.2007 paragraph 6 Insulation of engine parts NRC, at the latest on issue or renewal of the Community certificate after 1.1.2025 1.4.2003 ’
- (d)
The entry relating to Article 8.05(9) first sentence becomes the entry relating to Article 8.05(9) second sentence.
- (e)
The following entries are inserted after the entry relating to Article 8.05, paragraph 13:
‘
8.06 Tanks for lubricating oil, pipes and accessories NRC, at the latest on issue or renewal of the Community certificate after 1.1.2045 1.4.2007 8.07 Tanks for oils in power transmission systems, control and activating systems and heating systems, pipes and accessories NRC, at the latest on issue or renewal of the Community certificate after 1.1.2045 1.4.2007 ’
- (f)
The entry relating to Chapter 8a is replaced by the following:
‘
CHAPTER 8a The regulations do not apply:
- (a)
for engines, which were installed before 1.1.2003; and
- (b)
for exchange engines, which up to 31.12.2011 are installed on board craft which were in operation on 1.1.2002.
1.1.2002 8a.02(2) and (3) Compliance with the requirements/exhaust gas emission limit values For engines which were installed:
- (a)
in craft between 1.1.2003 and 1.7.2007 the exhaust gas limit values as referred to in Annex XIV of Directive 97/68 apply;
- (b)
in craft or in on-board machinery after 30.6.2007 the exhaust gas limit values as referred to in Annex XV of Directive 97/68 apply.
The requirements for the categories:
- (aa)
V for propulsion engines and for auxiliary engines above 560 kW; and
- (bb)
D, E, F, G, H, I, J, K for auxiliary engines of Directive 97/68/EC;
apply as equivalent.
1.7.2007 ’
- (a)
- (g)
The entry relating to Article 15.01(1)(c) is replaced by the following:
‘
15.01(1)(c) Non-application of Article 8.08(2), second sentence NRC, at the latest on issue or renewal of the Community certificate 1.1.2006 ’