Directive 2009/62/EC of the European Parliament and of the Council of 13 July 2009 relating to the space for mounting the rear registration plate of two or three-wheel motor vehicles (Codified version) (Text with EEA relevance) (repealed)
EU Directive 2009/62 · Adopted 13 July 2009 · Extends to United Kingdom
Directive 2009/62/EC of the European Parliament and of the Council
of 13 July 2009
relating to the space for mounting the rear registration plate of two or three-wheel motor vehicles
(Codified version)
(Text with EEA relevance) (repealed)
F1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Annotations to the whole text
Textual amendments
Contents
- 1Article 1 Repealed
- 2Article 2 Repealed
- 3Article 3 Repealed
- 4Article 4 Repealed
- 5Article 5 Repealed
- 6Article 6 Repealed
- 7Article 7 Repealed
- Signature
- Annex I Repealed
- 1DIMENSIONS Repealed
- Mopeds and light quadricycles without a body Repealed
- 1.1.1Division 1.1.1 Repealed
- 1.1.2Height: 175 mm; Repealed
- 1.1.3Division 1.1.3 Repealed
- 1.1.4Division 1.1.4 Repealed
- Motorcycles, tricycles up to a maximum power of 15 kW and quadricycles, other than light quadricycles, without a body Repealed
- 1.2.1Division 1.2.1 Repealed
- 1.2.2Division 1.2.2 Repealed
- Tricycles with a maximum power exceeding 15 kW, light quadricycles fitted with a body and quadricycles, other than light quadricycles, fitted with a body Repealed
- 1.3.1Division 1.3.1 Repealed
- GENERAL LOCATION Repealed
- 2.1Division 2.1 Repealed
- 2.1.1Division 2.1.1 Repealed
- INCLINATION Repealed
- 3.1The rear registration plate: Repealed
- MAXIMUM HEIGHT Repealed
- 4.1Division 4.1 Repealed
- MINIMUM HEIGHT Repealed
- 5.1Division 5.1 Repealed
- GEOMETRIC VISIBILITY Repealed
- 6.1The space for mounting the plate must be visible within a space bordered by two dihedrals: one with a horizontal edge defined by two planes passing through the upper and lower horizontal edges of the space for mounting the plate, the angles of which in relation to the horizontal are shown in Figure 1; the other with a perceptibly vertical edge defined by two planes passing through each side of the plate, the angles of which in relation to the median longitudinal plane of the vehicle are shown in Figure 2. Repealed
- 1Appendix 1 Repealed
- 2Appendix 2 Repealed
- Annex II Repealed
- APart A Repealed
- BPart B Repealed
- Annex IIIAnnex III Repealed
1F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Signature
F1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1DIMENSIONSF1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.1.1F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.1.2Height: 175 mm;F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.1.3F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.1.4F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.1F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.3.1F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.1F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.1.1F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.1The rear registration plate:F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.1F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.1F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.1The space for mounting the plate must be visible within a space bordered by two dihedrals: one with a horizontal edge defined by two planes passing through the upper and lower horizontal edges of the space for mounting the plate, the angles of which in relation to the horizontal are shown in Figure 1; the other with a perceptibly vertical edge defined by two planes passing through each side of the plate, the angles of which in relation to the median longitudinal plane of the vehicle are shown in Figure 2.F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1F1
Information document in respect of the space for mounting the rear registration plate of a type of two or three-wheel motor vehicle
(to be attached to the application for EC component type-approval where this is submitted separately from the application for EC vehicle type-approval)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2F1
EC component type-approval certificate in respect of the space for mounting the rear registration plate of a type of two or three-wheel motor vehicle
MODEL
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.
Manufacturer’s name and address …
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.
Name and address of manufacturer’s representative (if any) …
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AF1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BF1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Annex IIIF1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .