Directive 2009/76/EC of the European Parliament and of the Council of 13 July 2009 relating to the driver-perceived noise level of wheeled agricultural or forestry tractors (Codified version) (Text with EEA relevance) (repealed)
EU Directive 2009/76 · Adopted 13 July 2009 · Extends to United Kingdom
Directive 2009/76/EC of the European Parliament and of the Council
of 13 July 2009
relating to the driver-perceived noise level of wheeled agricultural or forestry tractors
(Codified version)
(Text with EEA relevance) (repealed)
F1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Annotations to the whole text
Textual amendments
Contents
- 1Article 1 Repealed
- 2Article 2 Repealed
- 3Article 3 Repealed
- 4Article 4 Repealed
- 5Article 5 Repealed
- 6Article 6 Repealed
- 7Article 7 Repealed
- 8Article 8 Repealed
- 9Article 9 Repealed
- Signature
- Annex I: APPARATUS, CONDITIONS AND METHOD OF MEASUREMENT Repealed
- UNIT OF MEASUREMENT AND MEASURING APPARATUS Repealed
- 1.1Unit of measurement Repealed
- 1.2Measuring apparatus Repealed
- 2CONDITIONS OF MEASUREMENT Repealed
- METHOD OF MEASUREMENT Repealed
- 3.1The microphone must be located 250 mm to the side of the centre plane of the seat, the side being that on which the higher noise level is encountered. Repealed
- 3.2The maximum noise level in dB(A) shall be determined as follows: Repealed
- 3.3The test report shall include noise-level measurements carried out under the following conditions: Repealed
- 4ASSESSMENT CRITERIA Repealed
- Annex II: APPARATUS, CONDITIONS AND METHOD OF MEASUREMENT Repealed
- UNIT OF MEASUREMENT AND MEASURING APPARATUS Repealed
- 1.1Unit of measurement Repealed
- 1.2Measuring apparatus Repealed
- 2CONDITIONS OF MEASUREMENT Repealed
- METHOD OF MEASUREMENT Repealed
- 3.1The microphone must be located 250 mm to the side of the central plane of the seat, the side being that on which the higher noise level is encountered. Repealed
- 3.2Noise level shall be determined as follows: Repealed
- 4ASSESSMENT CRITERIA Repealed
- Annex III: DETERMINATION OF SEAT REFERENCE POINT Repealed
- DEFINITION Repealed
- 1.1Division 1.1 Repealed
- DETERMINATION OF SEAT REFERENCE POINT Repealed
- 2.1Division 2.1 Repealed
- 2.2Division 2.2 Repealed
- DESCRIPTION OF THE DEVICE Repealed
- 3.1Division 3.1 Repealed
- 3.2Division 3.2 Repealed
- 4SETTING UP THE DEVICE Repealed
- Appendix Repealed
- Annex IV Repealed
- APart A Repealed
- BPart B Repealed
- Annex VAnnex V Repealed
1F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Signature
F1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.1Unit of measurementF1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2Measuring apparatusF1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2CONDITIONS OF MEASUREMENTF1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.1The microphone must be located 250 mm to the side of the centre plane of the seat, the side being that on which the higher noise level is encountered.F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.2The maximum noise level in dB(A) shall be determined as follows:F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.3The test report shall include noise-level measurements carried out under the following conditions:F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4ASSESSMENT CRITERIAF1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.1Unit of measurementF1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2Measuring apparatusF1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2CONDITIONS OF MEASUREMENTF1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.1The microphone must be located 250 mm to the side of the central plane of the seat, the side being that on which the higher noise level is encountered.F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.2Noise level shall be determined as follows:F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4ASSESSMENT CRITERIAF1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.1F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.1F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.2F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.1F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.2F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4SETTING UP THE DEVICEF1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AF1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BF1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Annex VF1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .