OpenLegislation

Division 5.2.2.2 Use of correction factorsF1

United Kingdom

Original text. Later amendments are not shown.

In certain cases, for example in the presence of fatty acids with less than eight carbon atoms or of acids with secondary groups, the areas shall be corrected with specific correction factors (Fci). These factors shall be determined for each single instrument. For this purpose suitable reference materials with certified fatty acid composition in the corresponding range shall be used.

For this reference mixture, the mass percentage of the FAME i is given by the formula:

w i = (m i /Σ m) × 100

where

  • m i is the mass of the FAME i in the reference mixture;

  • Σm is the total of the masses of the various components as FAMEs of the reference mixture.

From the chromatogram of the reference mixture, calculate the percentage by area for the FAME i as follows:

w i = (A i /ΣA) × 100

where:

  • A i is the area of the FAME i in the reference mixture;

  • ΣA is the sum of all the areas of all the FAMEs of the reference mixture.

The correction factor F c is then

F c = (m i × ΣA)/(A i /Σm)

For the sample, the percentage by mass of each FAME i is:

w i = (F i × A i )/Σ (F i × A i )

The results are expressed to two decimal places.

  1. Note 5:Division Note 5:
  2. Note 6:Division Note 6:

Annotations

Textual amendments

F1

Substituted by Commission Implementing Regulation (EU) 2015/1833 of 12 October 2015 amending Regulation (EEC) No 2568/91 on the characteristics of olive oil and olive-residue oil and on the relevant methods of analysis.