OpenLegislation

Division 1.1.1.3

United Kingdom

Original text. Later amendments are not shown.

A member of the family means a vehicle that shares the following essential characteristics with its parent:

  1. (a)

    It is produced by the same vehicle manufacturer;

  2. (b)

    It is subject to the same emission limits;

  3. (c)

    If the gas fuelling system has a central metering for the whole engine, it has a certified power output between 0,7 and 1,15 times that of the engine of the parent vehicle;

  4. (d)

    If the gas fuelling system has an individual metering per cylinder, it has a certified power output per cylinder between 0,7 and 1,15 times that of the engine of the parent vehicle;

  5. (e)

    If fitted with a catalyst system, it has the same type of catalyst i.e. three-way, oxidation, de NOx;

  6. (f)

    It has a gas fuelling system (including the pressure regulator) from the same system manufacturer and of the same type: induction, vapour injection (single point, multipoint), liquid injection (single point, multipoint);

  7. (g)

    This gas fuelling system is controlled by an ECU of the same type and technical specification, containing the same software principles and control strategy. The vehicle may have a second ECU compared to the parent vehicle, provided that the ECU is only used to control the injectors, additional shut-off valves and the data acquisition from additional sensors.

With regard to the requirements referred to in point (c) and (d), in the case where a demonstration shows two gas fuelled vehicles could be members of the same family with the exception of their certified power output, respectively P1 and P2 (P1 < P2), and both are tested as if they were parent vehicles, the family relation will be considered valid for any vehicle with a certified power output between 0,7 × P1 and 1,15 × P2.

Notes on Division 1.1

Textual amendments

F1

Substituted by Commission Regulation (EU) No 630/2012 of 12 July 2012 amending Regulation (EC) No 692/2008, as regards type-approval requirements for motor vehicles fuelled by hydrogen and mixtures of hydrogen and natural gas with respect to emissions, and the inclusion of specific information regarding vehicles fitted with an electric power train in the information document for the purpose of EC type-approval (Text with EEA relevance).