OpenLegislation

Commission Regulation (EC) No 692/2008 of 18 July 2008 implementing and amending Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information (Text with EEA relevance)

EU Regulation No 692/2008 · Adopted 18 July 2008 · Extends to United Kingdom

Original text. legislation.gov.uk does not revise this item, so later amendments are not shown here. Changes made to it are listed under each provision when known.

Commission Regulation (EC) No 692/2008

of 18 July 2008

implementing and amending Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information

(Text with EEA relevance)

THE COMMISSION OF THE EUROPEAN COMMUNITIES,

Having regard to the Treaty establishing the European Community, and in particular Article 95 thereof,

Having regard to Regulation (EC) No 715/2007 of the European Parliament and of the Council of 20 June 2007 on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance informationf1, and in particular Articles 4(4), 5(3) and 8 thereof

Whereas:

(1)

Regulation (EC) No 715/2007 is one of the separate regulatory acts under the type-approval procedure laid down by Council Directive 70/156/EEC of 6 February 1970 on the approximation of the laws of the Member States relating to the type-approval of motor vehicles and their trailersf2.

(2)

Regulation (EC) No 715/2007 requires new light-duty vehicles to comply with new emission limits and makes additional requirements on access to information. The technical requirements take effect in two stages, Euro 5 starting from 1 September 2009 and Euro 6 from 1 September 2014. The specific technical provisions necessary to implement that Regulation should be adopted. Therefore, the present Regulation aims at setting the requirements necessary for the type-approval of Euro 5 and 6 specification vehicles.

(3)

Article 5 of Regulation (EC) No 715/2007 provides for specific technical requirements relating to the control of emissions from vehicles to be set in its implementing legislation. Therefore, it is appropriate to adopt such requirements.

(4)

Following the adoption of the main requirements for type approval in Regulation (EC) No 715/2007, it is necessary to establish administrative provisions for EC type-approval of light duty vehicles. These administrative requirements include provisions for conformity of production and in-service conformity to ensure continued good performance of production vehicles.

(5)

In accordance with Article 11 of Regulation (EC) No 715/2007, it is necessary to establish requirements for type approval of replacement pollution control devices so as to ensure that they function correctly.

(6)

In accordance with Articles 6 and 7 of Regulation (EC) No 715/2007, it is also necessary to establish requirements to ensure that vehicle on board diagnostic (OBD) and vehicle repair and maintenance information is readily accessible, so as to ensure that independent operators have access to such information.

(7)

In accordance with Regulation (EC) No 715/2007, the measures provided for in this Regulation regarding access to vehicle repair and maintenance information, information for diagnostic tools and the compatibility of replacement parts with vehicle OBD systems, should not be restricted to emissions-related components and systems but cover all aspects of a vehicle subject to type-approval within the scope of this Regulation.

(8)

As provided by Article 14(2) of Regulation (EC) No 715/2007, recalibrated limit values for particulate mass and new limit values for number of particles emitted are introduced.

(9)

The measures provided for in this Regulation are in accordance with the opinion of the Technical Committee — Motor Vehicles established by Article 40 of Directive 2007/46/EC of the European Parliament and of the Council of 5 September 2007 establishing a framework for the approval of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles (Framework Directive)f3.

(10)

A Forum should be established to examine any concerns raised regarding the implementation of section 2.2 of Annex XIV, concerning access information relating to vehicle security features. The information exchange in the Forum should help to reduce the risk of misuse of vehicle security information. Due to the sensitivity of the subject matter it might be necessary to keep discussions and findings of the Forum confidential.

HAS ADOPTED THIS REGULATION:

Annotations to the whole text

Footnotes

f1

OJ L 171, 29.6.2007, p. 1.

f2

OJ L 42, 23.2.1970, p. 1 Directive as last amended by Regulation (EC) No 715/2007

f3

OJ L 263, 9.10.2007, p. 1.

Contents

  1. 1Subject matter
  2. 2Definitions
  3. 3Requirements for type-approval
  4. 4Requirements for type-approval regarding the OBD system
  5. 5Application for EC type-approval of a vehicle with regard to emissions and access to vehicle repair and maintenance information
  6. 6Administrative provisions for EC type-approval of a vehicle with regard to emissions and access to vehicle repair and maintenance information
  7. 7Amendments to type-approvals
  8. 8Conformity of production
  9. 9In service conformity
  10. 10Pollution control devices
  11. 11Application for EC type-approval of a type of replacement pollution control device as a separate technical unit
  12. 12Administrative provisions for EC type-approval of replacement pollution control device as separate technical unit
  13. 13Access to vehicle OBD and vehicle repair and maintenance information
  14. 14Compliance with the obligations regarding access to vehicle OBD and vehicle repair and maintenance information
  15. 15Special requirements regarding type approval information
  16. 16Amendments to Regulation (EC) No 715/2007
  17. 16aTransitional provisions
  18. 17Entry into force
  19. Signature
  20. Annex I: ADMINISTRATIVE PROVISIONS FOR EC TYPE-APPROVAL
  21. ADDITIONAL REQUIREMENTS FOR GRANTING OF EC TYPE-APPROVAL
  22. Additional requirements for mono fuel gas vehicles, bi-fuel gas vehicles and flex fuel H2NG vehicles.
  24. Division
  25. 1.1.1.1Division 1.1.1.1
  26. 1.1.1.2Division 1.1.1.2
  27. 1.1.1.3Division 1.1.1.3
  29. Division
  30. 1.1.2.1Division 1.1.2.1
  31. 1.1.2.2Division 1.1.2.2
  32. 1.1.2.3Division 1.1.2.3
  33. 1.1.2.4Division 1.1.2.4
  34. 1.1.2.5Division 1.1.2.5
  35. 1.1.3Division 1.1.3
  36. 1.1.4Division 1.1.4
  37. Additional requirements for flex fuel vehicles
  38. 1.2.1Division 1.2.1
  39. 1.2.2Division 1.2.2
  40. ADDITIONAL TECHNICAL REQUIREMENTS AND TESTS
  41. Small volume manufacturers
  42. 2.1.1Division 2.1.1
  43. Inlets to fuel tanks
  44. 2.2.1Division 2.2.1
  45. 2.2.2Division 2.2.2
  46. 2.2.3Division 2.2.3
  47. Provisions for electronic system security
  48. 2.3.1Division 2.3.1
  49. 2.3.2Division 2.3.2
  50. 2.3.3Division 2.3.3
  51. 2.3.4Division 2.3.4
  52. 2.3.5Division 2.3.5
  53. Application of tests
  54. 2.4.1Division 2.4.1
  55. Explanatory note :
  56. EXTENSIONS TO TYPE-APPROVALS
  57. Extensions for tailpipe emissions (type 1, type 2 and type 6 tests)
  59. Division
  60. 3.1.1.1Division 3.1.1.1
  61. 3.1.1.2Division 3.1.1.2
  63. Division
  64. 3.1.2.1Division 3.1.2.1
  65. 3.1.2.2Division 3.1.2.2
  66. 3.1.2.3Division 3.1.2.3
  67. 3.1.2.4Division 3.1.2.4
  68. 3.1.3Division 3.1.3
  70. Division
  71. 3.1.4.1Division 3.1.4.1
  72. 3.1.4.2Division 3.1.4.2
  73. 3.1.5Division 3.1.5
  74. Extensions for evaporative emissions (type 4 test)
  76. Division
  77. 3.2.1.1Division 3.2.1.1
  78. 3.2.1.2Division 3.2.1.2
  79. 3.2.1.3Division 3.2.1.3
  80. 3.2.1.4Division 3.2.1.4
  81. 3.2.1.5Division 3.2.1.5
  82. 3.2.1.6Division 3.2.1.6
  83. 3.2.1.7Division 3.2.1.7
  84. 3.2.1.8Division 3.2.1.8
  86. Division
  87. 3.2.2.1Division 3.2.2.1
  88. 3.2.2.2Division 3.2.2.2
  89. 3.2.2.3Division 3.2.2.3
  90. 3.2.2.4Division 3.2.2.4
  91. 3.2.2.5Division 3.2.2.5
  92. 3.2.2.6Division 3.2.2.6
  93. Extensions for durability of pollution control devices (type 5 test)
  95. Division
  96. 3.3.1.1Division 3.3.1.1
  97. 3.3.1.2Division 3.3.1.2
  98. 3.3.1.3Division 3.3.1.3
  99. 3.3.1.4Division 3.3.1.4
  100. Extensions for on-board diagnostics
  101. 3.4.1Division 3.4.1
  102. Extensions for CO2 emissions and fuel consumption
  104. Division
  105. 3.5.1.1Division 3.5.1.1
  107. Division
  108. 3.5.2.1Division 3.5.2.1
  109. 3.5.2.2Division 3.5.2.2
  110. 3.5.3Division 3.5.3
  111. 3.5.4Division 3.5.4
  113. Division
  114. 3.5.5.1Division 3.5.5.1
  115. 3.5.5.2Division 3.5.5.2
  116. Type-approval of vehicles of category N within a family for fuel consumption and CO2 emissions
  117. Division
  119. Division
  120. 3.6.1.1Division 3.6.1.1
  121. 3.6.1.2Division 3.6.1.2
  122. 3.6.2Division 3.6.2
  123. 3.6.3Division 3.6.3
  124. CONFORMITY OF PRODUCTION
  125. Introduction
  126. 4.1.1Division 4.1.1
  127. Checking the conformity of the vehicle for a type 1 test
  128. 4.2.1Division 4.2.1
  130. Division
  131. 4.2.2.1Division 4.2.2.1
  132. 4.2.2.2Division 4.2.2.2
  133. 4.2.2.3Division 4.2.2.3
  134. Division
  136. Division
  137. 4.2.3.1Division 4.2.3.1
  138. 4.2.3.2Division 4.2.3.2
  139. 4.2.3.3Division 4.2.3.3
  140. Checking the conformity of the vehicle for CO2 emissions
  141. 4.3.1Division 4.3.1
  142. 4.3.2Division 4.3.2
  143. 4.3.3Division 4.3.3
  145. Division
  146. 4.3.4.1Division 4.3.4.1
  147. 4.3.4.2Division 4.3.4.2
  148. 4.3.4.3Division 4.3.4.3
  149. 4.3.4.4Division 4.3.4.4
  150. 4.3.4.5Division 4.3.4.5
  152. Division
  153. 4.3.5.1Division 4.3.5.1
  154. 4.3.5.2Division 4.3.5.2
  155. Vehicles powered by an electric power train only
  156. Division
  158. Division
  159. 4.4.1.1Division 4.4.1.1
  160. 4.4.1.2Division 4.4.1.2
  161. 4.4.1.3Division 4.4.1.3
  162. 4.4.1.4Division 4.4.1.4
  163. 4.4.1.5Division 4.4.1.5
  164. 4.4.1.6Division 4.4.1.6
  166. Division
  167. 4.4.2.1Division 4.4.2.1
  168. 4.4.2.2Division 4.4.2.2
  169. 4.4.2.3Division 4.4.2.3
  170. 4.4.2.4Division 4.4.2.4
  171. Vehicles powered by a hybrid electric power train
  172. 4.5.1Division 4.5.1
  173. 4.5.2Division 4.5.2
  174. 4.5.3Division 4.5.3
  175. 4.5.4Division 4.5.4
  176. Checking the conformity of the vehicle for a type 3 test
  177. 4.6.1Division 4.6.1
  178. Checking the conformity of the vehicle for a type 4 test
  179. 4.7.1Division 4.7.1
  180. Checking the conformity of the vehicle for On-board Diagnostics (OBD)
  182. Division
  183. 4.8.1.1Division 4.8.1.1
  184. 4.8.1.2Division 4.8.1.2
  185. 4.8.1.3Division 4.8.1.3
  186. 4.8.1.4Division 4.8.1.4
  187. Checking the conformity of a vehicle fuelled by LPG, natural gas or H2NG
  188. 4.9.1Division 4.9.1
  189. Checking the conformity of vehicle for smoke opacity
  190. 4.10.1Division 4.10.1
  191. 4.10.2Division 4.10.2
  192. 1Verification of conformity of production — First statistical method
  193. 2Verification of conformity of production — Second statistical method
  194. 3MODEL
  195. 4MODEL OF EC TYPE-APPROVAL CERTIFICATE
  196. Addendum to EC type-approval certificate No …concerning the type-approval of a vehicle with regard to emissions and access to vehicle repair and maintenance information according to Regulation (EC) No 715/2007
  197. 5Vehicle OBD information
  198. 6EC Type –Approval Certification Numbering System
  199. 7Appendix 7
  200. Annex II: IN-SERVICE CONFORMITY
  201. INTRODUCTION
  202. 1.1Division 1.1
  203. AUDIT OF IN-SERVICE CONFORMITY
  204. 2.1Division 2.1
  205. 2.2Division 2.2
  206. 2.3Division 2.3
  207. 2.4Parameters defining the tailpipe emissions in-service family
  208. 2.5Information requirements
  209. SELECTION OF VEHICLES FOR IN-SERVICE CONFORMITY
  210. 3.1Division 3.1
  211. 3.2Division 3.2
  212. 3.3Division 3.3
  213. 3.4Division 3.4
  214. Sample size
  215. 3.5.1When applying the statistical procedure defined in Appendix 2 (i.e. for tailpipe emissions), the number of sample lots shall depend on the annual sales volume of an in-service family in the Union, as defined in the following table:
  216. 3.5.2For IUPR, the number of sample lots to be taken is described in the table in point 3.5.1 and is based on the number of vehicles of an OBD family that are approved with IUPR (subject to sampling).
  217. 4Division 4
  218. 4.1Division 4.1
  219. 4.2Division 4.2
  220. 4.3Division 4.3
  221. 1Appendix 1
  222. 2Appendix 2
  223. 3Appendix 3
  224. Annex III: VERIFYING AVERAGE EXHAUST EMISSIONS AT AMBIENT CONDITIONS
  225. 1INTRODUCTION
  226. GENERAL REQUIREMENTS
  227. 2.1Division 2.1
  228. 2.2Division 2.2
  229. 2.3Division 2.3
  230. 2.4Division 2.4
  231. 2.5Division 2.5
  233. Division
  234. 2.6.1Division 2.6.1
  235. TECHNICAL REQUIREMENTS
  236. 3.1Division 3.1
  237. 3.2Division 3.2
  238. 3.3Division 3.3
  239. 3.3.aDivision 3.3.a
  240. 3.4Division 3.4
  241. 3.5Division 3.5
  242. 3.6Division 3.6
  243. 3.7Division 3.7
  244. 3.8Division 3.8
  245. 3.9Division 3.9
  246. 3.10Division 3.10
  247. 3.11Division 3.11
  248. 3.12Division 3.12
  250. Division
  251. 3.13.1Division 3.13.1
  252. 3.13.2Division 3.13.2
  253. 3.13.3Division 3.13.3
  254. 3.13.4Division 3.13.4
  255. 3.14Division 3.14
  256. Annex IIIA: VERIFYING REAL DRIVING EMISSIONS
  257. INTRODUCTION, DEFINITIONS AND ABBREVIATIONS
  258. 1.1Introduction
  259. Definitions
  260. 1.2.1Division 1.2.1
  261. 1.2.2Division 1.2.2
  262. 1.2.3Division 1.2.3
  263. 1.2.4Division 1.2.4
  264. 1.2.5Division 1.2.5
  265. 1.2.6Division 1.2.6
  266. 1.2.7Division 1.2.7
  267. 1.2.8Division 1.2.8
  268. 1.2.9Division 1.2.9
  269. 1.2.10Division 1.2.10
  270. 1.2.11Division 1.2.11
  271. 1.2.12Division 1.2.12
  272. 1.2.13Division 1.2.13
  273. 1.2.14Division 1.2.14
  274. 1.2.15Division 1.2.15
  275. 1.2.16Division 1.2.16
  276. 1.2.17Division 1.2.17
  277. 1.2.18Division 1.2.18
  278. 1.2.19Division 1.2.19
  279. 1.2.20Division 1.2.20
  280. 1.2.21Division 1.2.21
  281. 1.2.22Division 1.2.22
  282. 1.2.23Division 1.2.23
  283. 1.2.24Division 1.2.24
  284. 1.2.25Division 1.2.25
  285. 1.2.26Division 1.2.26
  286. 1.2.27Division 1.2.27
  287. 1.2.28Division 1.2.28
  288. 1.2.29Division 1.2.29
  289. 1.2.30Division 1.2.30
  290. 1.2.31Division 1.2.31
  291. 1.2.32Division 1.2.32
  292. 1.2.33Division 1.2.33
  293. 1.2.34Division 1.2.34
  294. 1.2.35Division 1.2.35
  295. 1.2.36Division 1.2.36
  296. 1.2.37Division 1.2.37
  297. 1.2.38Division 1.2.38
  298. 1.2.39Division 1.2.39
  299. 1.3Abbreviations
  300. GENERAL REQUIREMENTS
  301. 2.1Not-to-exceed emission limits
  302. 2.1.1Final conformity factors
  303. 2.1.2Temporary conformity factors
  304. 2.1.3Transfer functions
  305. 2.2Division 2.2
  306. 2.3Division 2.3
  307. 2.4Division 2.4
  308. 2.5Division 2.5
  309. RDE TEST TO BE PERFORMED
  310. 3.1Division 3.1
  311. 3.1.0Division 3.1.0
  312. 3.1.1Division 3.1.1
  313. 3.1.2Division 3.1.2
  314. 3.1.3Division 3.1.3
  315. 3.1.3.1Division 3.1.3.1
  316. 3.1.3.2Division 3.1.3.2
  317. 3.1.3.3Division 3.1.3.3
  318. 3.1.3.4Division 3.1.3.4
  319. GENERAL REQUIREMENTS
  320. 4.1Division 4.1
  321. 4.2Division 4.2
  322. 4.3Division 4.3
  323. 4.4Division 4.4
  324. BOUNDARY CONDITIONS
  325. Vehicle payload and test mass
  326. 5.1.1Division 5.1.1
  327. 5.1.2Division 5.1.2
  328. Ambient conditions
  329. 5.2.1Division 5.2.1
  330. 5.2.2Division 5.2.2
  331. 5.2.3Division 5.2.3
  332. 5.2.4Division 5.2.4
  333. 5.2.5Division 5.2.5
  334. 5.2.6Division 5.2.6
  335. 5.3Division 5.3 Repealed
  336. 5.4Dynamic conditions
  337. 5.4.1Division 5.4.1
  338. 5.4.2Division 5.4.2
  339. Vehicle condition and operation
  340. 5.5.1Division 5.5.1
  341. 5.5.2Division 5.5.2
  342. 5.5.2.1Division 5.5.2.1
  343. 5.5.2.2Division 5.5.2.2
  344. 5.5.2.3Division 5.5.2.3
  345. 5.5.2.4Division 5.5.2.4
  346. TRIP REQUIREMENTS
  347. 6.1Division 6.1
  348. 6.2Division 6.2
  349. 6.3Division 6.3
  350. 6.4Division 6.4
  351. 6.5Division 6.5
  352. 6.6Division 6.6
  353. 6.7Division 6.7
  354. 6.8Division 6.8
  355. 6.9Division 6.9
  356. 6.10Division 6.10
  357. 6.11Division 6.11
  358. 6.12Division 6.12
  359. OPERATIONAL REQUIREMENTS
  360. 7.1Division 7.1
  361. 7.2Division 7.2
  362. 7.3Division 7.3
  363. 7.4Division 7.4
  364. 7.5Division 7.5
  365. 7.6Division 7.6
  366. LUBRICATING OIL, FUEL AND REAGENT
  367. 8.1Division 8.1
  368. 8.2Division 8.2
  369. EMISSIONS AND TRIP EVALUATION
  370. 9.1Division 9.1
  371. 9.2Division 9.2
  372. 9.3Division 9.3
  373. 9.4Division 9.4
  374. 9.5Division 9.5
  375. 9.6Division 9.6
  376. 1Appendix 1
  377. 2Appendix 2
  378. 3Appendix 3
  379. 4Appendix 4
  380. 5Appendix 5
  381. 6Appendix 6
  382. 7Appendix 7
  383. 7aAppendix 7a
  384. 7bAppendix 7b
  385. 8Appendix 8
  386. 9Appendix 9
  387. Annex IVEMISSIONS DATA REQUIRED AT TYPE-APPROVAL FOR ROADWORTHINESS PURPOSES
  388. 1MEASURING CARBON MONOXIDE EMISSION AT IDLING SPEEDS
  389. 2MEASUREMENT OF SMOKE OPACITY
  390. Annex V: VERIFYING EMISSIONS OF CRANKCASE GASES
  391. INTRODUCTION
  392. 1.1Division 1.1
  393. GENERAL REQUIREMENTS
  394. 2.1Division 2.1
  395. TECHNICAL REQUIREMENTS
  396. 3.1Division 3.1
  397. Annex VI
  398. Introduction
  399. 1.1Division 1.1
  400. Technical requirements
  401. 2.1Introduction
  402. 2.2Division 2.2
  403. Vehicle and fuel
  404. Vehicle
  405. 3.1.1Division 3.1.1
  406. Fuel
  407. 3.2.1Division 3.2.1
  408. Test equipment for evaporative test
  409. 4.1Chassis dynamometer
  410. 4.2Evaporative emission measurement enclosure
  411. Figure 1Determination of evaporative emissions
  412. Notes:Division Notes:
  413. 4.3Analytical systems
  414. 4.4Temperature recording
  415. 4.5Pressure recording
  416. 4.6Fans
  417. 4.7Gases
  418. 4.8Additional Equipment
  419. Test procedure
  420. 5.1Canister(s) bench aging
  421. Figure 2Canister bench aging procedure
  422. 5.1.1Temperature conditioning test
  423. Figure 3Temperature conditioning cycle
  424. 5.1.2Canister vibration conditioning test
  425. Canister Fuel aging test
  426. Fuel Aging for 300 cycles
  427. 5.1.3.1.1Division 5.1.3.1.1
  428. 5.1.3.1.1.1Division 5.1.3.1.1.1
  429. 5.1.3.1.2Division 5.1.3.1.2
  430. 5.1.3.1.3Division 5.1.3.1.3
  431. 5.1.3.1.4Division 5.1.3.1.4
  432. 5.1.3.2Division 5.1.3.2
  433. 5.1.3.3Division 5.1.3.3
  434. 5.2Determination of the Permeability Factor of the Fuel System (Figure 4)
  435. Figure 4Determination of the Permeability Factor
  436. 5.2.1Division 5.2.1
  437. 5.2.2Division 5.2.2
  438. 5.2.3Division 5.2.3
  439. 5.2.4Division 5.2.4
  440. 5.2.5Division 5.2.5
  441. 5.2.6Division 5.2.6
  442. 5.2.7Division 5.2.7
  443. 5.2.8Division 5.2.8
  444. 5.2.8.1Division 5.2.8.1
  445. 5.3Sequence of measurement of hot soak and diurnal losses
  446. 5.3.1Soak
  447. 5.3.2Fuel drain and refill
  448. 5.3.3Preconditioning drive
  449. 5.3.4Soak
  450. 5.3.5Canister breakthrough
  451. Dynamometer test
  452. 5.3.6.1Division 5.3.6.1
  453. 5.3.6.2Division 5.3.6.2
  454. 5.3.7Hot Soak
  455. 5.3.8Soak
  456. Diurnal test
  457. 5.3.9.1Division 5.3.9.1
  458. 5.3.9.2Division 5.3.9.2
  459. 5.3.10Calculation
  460. 5.3.11Division 5.3.11
  461. Annex VII: VERIFYING THE DURABILITY OF POLLUTION CONTROL DEVICES
  462. INTRODUCTION
  463. 1.1Division 1.1
  464. 1.2Division 1.2
  465. 1.3Division 1.3
  466. 1.4Division 1.4
  467. 1.5Division 1.5
  468. 1.6Division 1.6
  469. 1.7Division 1.7
  470. TECHNICAL REQUIREMENTS
  472. Division
  473. 2.1.1Division 2.1.1
  474. 2.1.2Division 2.1.2
  475. 2.1.3Division 2.1.3
  476. 2.1.4Division 2.1.4
  477. Bench Ageing Durability Test
  478. 2.2.1Division 2.2.1
  480. Vehicles with Positive Ignition Engines
  481. 2.3.1.1Division 2.3.1.1
  482. 2.3.1.2Division 2.3.1.2
  483. 2.3.1.3Division 2.3.1.3
  484. 2.3.1.4Division 2.3.1.4
  485. 2.3.1.5Division 2.3.1.5
  486. 2.3.1.6Division 2.3.1.6
  487. 2.3.1.7Division 2.3.1.7
  488. Vehicles with Compression Ignition Engines
  489. 2.3.2.1Division 2.3.2.1
  490. 2.3.2.2Division 2.3.2.2
  491. 2.3.2.3Division 2.3.2.3
  492. 2.3.2.4Division 2.3.2.4
  493. 2.3.2.5Division 2.3.2.5
  494. 2.3.2.6Division 2.3.2.6
  495. 1Standard Bench Cycle (SBC)
  496. 2Standard Diesel Bench Cycle (SDBC)
  497. 3Standard Road Cycle (SRC)
  498. Annex VIII: VERIFYING THE AVERAGE EMISSIONS AT LOW AMBIENT TEMPERATURES
  499. INTRODUCTION
  500. 1.1Division 1.1
  501. GENERAL REQUIREMENTS
  502. 2.1Division 2.1
  503. 2.2Division 2.2
  504. 2.3Division 2.3
  505. TECHNICAL REQUIREMENTS
  506. 3.1Division 3.1
  507. 3.2Division 3.2
  508. 3.3Division 3.3
  509. Annex IX: SPECIFICATIONS OF REFERENCE FUELS
  510. REFERENCE FUELS
  511. 1Technical data on fuels for testing vehicles with positive-ignition engines
  512. 2Technical data on fuels for testing vehicles with compression ignition engines
  513. BREFERENCE FUELS FOR TESTING EMISSIONS AT LOW AMBIENT TEMPERATURES — TYPE 6 TEST
  514. Annex X: EMISSIONS TEST PROCEDURE FOR HYBRID ELECTRIC VEHICLES (HEV)
  515. INTRODUCTION
  516. 1.1Division 1.1
  517. TECHNICAL REQUIREMENTS
  518. 2.1Division 2.1
  519. 2.2Division 2.2
  520. Annex XI: ON-BOARD DIAGNOSTICS (OBD) FOR MOTOR VEHICLES
  521. INTRODUCTION
  522. 1.1Division 1.1
  523. REQUIREMENTS AND TESTS
  524. 2.1Division 2.1
  525. 2.2Division 2.2
  527. Division
  528. 2.3.1Division 2.3.1
  529. 2.3.2Division 2.3.2
  530. 2.3.3Division 2.3.3
  531. Explanatory note:
  532. 2.3.4Division 2.3.4
  533. 2.4Division 2.4
  534. 2.5Division 2.5
  535. 2.6Division 2.6
  536. 2.7Division 2.7
  537. 2.8Division 2.8
  538. 2.9Division 2.9
  539. 2.10Division 2.10
  540. 2.11Division 2.11
  541. 2.12Division 2.12
  542. 2.13Division 2.13
  543. 2.14Division 2.14
  544. ADMINISTRATIVE PROVISIONS FOR DEFICIENCIES OF OBD SYSTEMS
  545. 3.1Division 3.1
  546. 3.2Division 3.2
  547. 3.3Division 3.3
  548. 3.4Division 3.4
  549. 3.5Division 3.5
  550. 3.6Division 3.6
  551. Deficiency period
  552. 3.6.1Division 3.6.1
  553. 3.6.2Division 3.6.2
  554. 3.7Division 3.7
  555. ACCESS TO OBD INFORMATION
  556. 4.1Division 4.1
  557. 4.2Division 4.2
  558. 4.3Division 4.3
  559. 4.4Division 4.4
  560. 4.5Division 4.5
  561. 4.6Division 4.6
  562. 1FUNCTIONAL ASPECTS OF ON-BOARD DIAGNOSTIC (OBD) SYSTEMS
  563. 2ESSENTIAL CHARACTERISTICS OF THE VEHICLE FAMILY
  564. Annex XII: DETERMINATION OF CO 2 EMISSIONS, FUEL CONSUMPTION, ELECTRIC ENERGY CONSUMPTION AND ELECTRIC RANGE
  565. 1INTRODUCTION
  566. GENERAL REQUIREMENTS
  567. 2.1Division 2.1
  569. Division
  570. 2.2.1Division 2.2.1
  571. 2.2.2Division 2.2.2
  572. 2.3Division 2.3
  573. TECHNICAL REQUIREMENTS
  574. 3.1Division 3.1
  575. 3.2Division 3.2
  576. 3.3Division 3.3
  577. 3.4Division 3.4
  578. 3.5Division 3.5
  579. TYPE-APPROVAL OF VEHICLES FITTED WITH ECO-INNOVATIONS
  580. 4.1Division 4.1
  581. 4.2Division 4.2
  582. 4.3Division 4.3
  583. 4.4Division 4.4 Repealed
  584. DETERMINATION OF CO 2 EMISSIONS AND FUEL CONSUMPTION FROM N 1 VEHICLES SUBMITTED TO MULTI-STAGE TYPE-APPROVAL
  585. 5.1Division 5.1
  586. 5.2Division 5.2
  587. 5.3Division 5.3
  588. 5.4Division 5.4
  589. 5.5Division 5.5
  590. 5.6Division 5.6
  591. 5.7Division 5.7
  592. 5.8Division 5.8
  593. Annex XIII: EC TYPE-APPROVAL OF REPLACEMENT POLLUTION CONTROL DEVICES AS SEPARATE TECHNICAL UNIT
  594. INTRODUCTION
  595. 1.1Division 1.1
  596. GENERAL REQUIREMENTS
  597. 2.1Marking
  598. 2.2Documentation
  599. 2.3Division 2.3
  600. EC SEPARATE TECHNICAL UNIT TYPE-APPROVAL MARK
  601. 3.1Division 3.1
  602. 3.2Division 3.2
  603. 3.3Division 3.3
  604. 3.4Division 3.4
  605. TECHNICAL REQUIREMENTS
  607. Division
  608. 4.1.1Division 4.1.1
  609. 4.1.2Division 4.1.2
  610. 4.1.3Division 4.1.3
  611. 4.1.4Division 4.1.4
  612. 4.2Division 4.2
  613. 4.3Division 4.3
  614. Requirements for replacement periodically regenerating systems
  615. Requirements regarding emissions
  616. 4.4.1.1Division 4.4.1.1
  617. Determination of the basis for comparison
  618. 4.4.2.1Division 4.4.2.1
  619. 4.4.2.2Division 4.4.2.2
  620. Exhaust gas test with a replacement periodically regeneration system
  621. 4.4.3.1Division 4.4.3.1
  622. 4.4.3.2Division 4.4.3.2
  623. 4.4.4Other requirements
  624. DOCUMENTATION
  625. 5.1Division 5.1
  626. CONFORMITY OF PRODUCTION
  627. 6.1Division 6.1
  628. Special provisions
  629. 6.2.1Division 6.2.1
  630. 6.2.2Division 6.2.2
  631. 1MODEL
  632. 2MODEL EC TYPE-APPROVAL CERTIFICATE
  633. 3Example of the EC type-approval marks
  634. Annex XIV: Access to vehicle OBD and vehicle repair and maintenance information
  635. INTRODUCTION
  636. 1.1Division 1.1
  637. REQUIREMENTS
  638. 2.1Division 2.1
  639. 2.2Division 2.2
  640. 2.3Division 2.3
  641. 2.4Division 2.4
  642. 2.5Division 2.5
  643. 2.6Division 2.6
  644. 2.7Division 2.7
  645. 2.8Division 2.8
  646. 1Appendix 1
  647. Annex XV: IN-SERVICE CONFORMITY OF VEHICLES TYPE-APPROVED UNDER DIRECTIVE 70/220/EEC
  648. CONFORMITY OF IN-SERVICE VEHICLES
  649. 1.1Division 1.1
  650. 1.2Division 1.2
  651. Parameters defining the in-service family
  652. Division
  653. 1.3.1Division 1.3.1
  654. 1.3.2Division 1.3.2
  655. 1.3.3Division 1.3.3
  656. 1.3.4Division 1.3.4
  657. 1.3.5Division 1.3.5
  658. 1.3.6Division 1.3.6
  659. 1.3.7Division 1.3.7
  660. 1.3.8Division 1.3.8
  661. 1.3.9Division 1.3.9
  662. 1.3.10Division 1.3.10
  663. 1.3.11Division 1.3.11
  665. Division
  666. 1.4.1Division 1.4.1
  667. 1.4.2Division 1.4.2
  668. 1.4.3Division 1.4.3
  669. 1.4.4Division 1.4.4
  670. 1.4.5Division 1.4.5
  671. 1.4.6Division 1.4.6
  672. 1.4.7Division 1.4.7
  673. 1.4.8Division 1.4.8
  674. 1.4.9Division 1.4.9
  675. 1.4.10Division 1.4.10
  676. 1.4.11Division 1.4.11
  677. 1.4.12Division 1.4.12
  678. 2Division 2
  680. Division
  681. 3.1Division 3.1
  682. 3.2Division 3.2
  683. 3.3Division 3.3
  684. 3.4Division 3.4
  685. 3.5Division 3.5
  686. 1In-service conformity check
  687. 2Statistical procedure for in-service conformity testing
  688. Annex XVI: REQUIREMENTS FOR VEHICLES THAT USE A REAGENT FOR THE EXHAUST AFTERTREATMENT SYSTEM
  689. 1INTRODUCTION
  690. REAGENT INDICATION
  691. 2.1Division 2.1
  692. DRIVER WARNING SYSTEM
  693. 3.1Division 3.1
  694. 3.2Division 3.2
  695. 3.3Division 3.3
  696. 3.4Division 3.4
  697. 3.5Division 3.5
  698. IDENTIFICATION OF INCORRECT REAGENT
  699. 4.1Division 4.1
  700. 4.2Division 4.2
  701. REAGENT CONSUMPTION MONITORING
  702. 5.1Division 5.1
  703. 5.2Division 5.2
  704. 5.3Division 5.3
  705. 5.4Division 5.4
  706. 5.5Division 5.5
  707. MONITORING NOx EMISSIONS
  708. 6.1Division 6.1
  709. 6.2Division 6.2
  710. STORAGE OF FAILURE INFORMATION
  711. 7.1Division 7.1
  712. 7.2Division 7.2
  713. DRIVER INDUCEMENT SYSTEM
  714. 8.1Division 8.1
  715. 8.2Division 8.2
  717. Division
  718. 8.3.1Division 8.3.1
  719. 8.3.2Division 8.3.2
  720. 8.3.3Division 8.3.3
  721. 8.3.4Division 8.3.4
  722. 8.4Division 8.4
  723. 8.5Division 8.5
  724. 8.6Division 8.6
  725. 8.7Division 8.7
  726. 8.8Division 8.8
  727. INFORMATION REQUIREMENTS
  728. 9.1Division 9.1
  729. 9.2Division 9.2
  730. 9.3Division 9.3
  731. 9.4Division 9.4
  732. 9.5Division 9.5
  733. 9.6Division 9.6
  734. 10OPERATING CONDITIONS OF THE AFTERTREATMENT SYSTEM
  735. Annex XVII: AMENDMENTS TO REGULATION (EC) No 715/2007
  737. Division
  738. 1Division 1
  739. 2Division 2
  740. Annex XVIII: SPECIAL PROVISIONS REGARDING ANNEX I TO COUNCIL DIRECTIVE 70/156/EEC
  744. 3.2.1.1Division 3.2.1.1
  746. Division
  747. 3.2.2.4Division 3.2.2.4
  748. 3.2.2.5Division 3.2.2.5
  752. 3.2.4.2.3.3Division 3.2.4.2.3.3
  754. Division
  755. 3.2.4.2.9.2Division 3.2.4.2.9.2
  757. Division
  758. 3.2.4.2.9.3.1Division 3.2.4.2.9.3.1
  759. 3.2.4.2.9.3.2Division 3.2.4.2.9.3.2
  760. 3.2.4.2.9.3.3Division 3.2.4.2.9.3.3
  761. 3.2.4.2.9.3.4Division 3.2.4.2.9.3.4
  762. 3.2.4.2.9.3.5Division 3.2.4.2.9.3.5
  763. 3.2.4.2.9.3.6Division 3.2.4.2.9.3.6
  764. 3.2.4.2.9.3.7Division 3.2.4.2.9.3.7
  765. 3.2.4.2.9.3.8Division 3.2.4.2.9.3.8
  768. Division
  769. 3.2.4.3.4.1Division 3.2.4.3.4.1
  770. 3.2.4.3.4.3Division 3.2.4.3.4.3
  771. 3.2.4.3.4.6Division 3.2.4.3.4.6
  772. 3.2.4.3.4.8Division 3.2.4.3.4.8
  773. 3.2.4.3.4.9Division 3.2.4.3.4.9
  774. 3.2.4.3.4.10Division 3.2.4.3.4.10
  775. 3.2.4.3.4.11Division 3.2.4.3.4.11
  777. 3.2.4.3.5.1Division 3.2.4.3.5.1
  778. 3.2.4.3.5.2Division 3.2.4.3.5.2
  781. 3.2.8.2.1Division 3.2.8.2.1
  782. 3.2.8.3Division 3.2.8.3
  784. 3.2.9.3Division 3.2.9.3
  786. 3.2.11.1Division 3.2.11.1
  789. Division
  791. 3.2.12.2.1.1Division 3.2.12.2.1.1
  793. Division
  794. 3.2.12.2.1.11.1Division 3.2.12.2.1.11.1
  795. 3.2.12.2.1.11.2Division 3.2.12.2.1.11.2
  796. 3.2.12.2.1.11.3Division 3.2.12.2.1.11.3
  797. 3.2.12.2.1.11.4Division 3.2.12.2.1.11.4
  798. 3.2.12.2.1.11.5Division 3.2.12.2.1.11.5
  799. 3.2.12.2.1.11.6Division 3.2.12.2.1.11.6
  800. 3.2.12.2.1.11.7Division 3.2.12.2.1.11.7
  801. 3.2.12.2.1.11.8Division 3.2.12.2.1.11.8
  802. 3.2.12.2.1.11.9Division 3.2.12.2.1.11.9
  803. 3.2.12.2.1.11.10Division 3.2.12.2.1.11.10
  804. 3.2.12.2.1.12Division 3.2.12.2.1.12
  805. 3.2.12.2.1.13Division 3.2.12.2.1.13
  807. 3.2.12.2.2.4Division 3.2.12.2.2.4
  808. 3.2.12.2.2.5Division 3.2.12.2.2.5
  810. 3.2.12.2.4.2Division 3.2.12.2.4.2
  813. 3.2.12.2.6.4.1Division 3.2.12.2.6.4.1
  814. 3.2.12.2.6.4.2Division 3.2.12.2.6.4.2
  815. 3.2.12.2.6.4.3Division 3.2.12.2.6.4.3
  816. 3.2.12.2.6.4.4Division 3.2.12.2.6.4.4
  817. 3.2.12.2.6.5Division 3.2.12.2.6.5
  818. 3.2.12.2.6.6Division 3.2.12.2.6.6
  821. Division
  822. 3.2.12.2.7.6.1Division 3.2.12.2.7.6.1
  823. 3.2.12.2.7.6.2Division 3.2.12.2.7.6.2
  824. 3.2.12.2.7.6.3Division 3.2.12.2.7.6.3
  825. 3.2.12.2.7.6.4Division 3.2.12.2.7.6.4
  827. 3.2.15.1Division 3.2.15.1
  829. 3.2.16.1Division 3.2.16.1
  831. Division
  832. 3.4.1Division 3.4.1
  833. 3.4.2Division 3.4.2
  835. Division
  837. Division
  838. 3.4.3.1.1Division 3.4.3.1.1
  839. 3.4.3.1.2Division 3.4.3.1.2
  840. 3.4.3.1.3Division 3.4.3.1.3
  842. Division
  843. 3.4.4.1Division 3.4.4.1
  844. 3.4.4.2Division 3.4.4.2
  845. 3.4.4.3Division 3.4.4.3
  846. 3.4.4.4Division 3.4.4.4
  847. 3.4.4.5Division 3.4.4.5
  848. 3.4.4.6Division 3.4.4.6
  850. Division
  851. 3.4.5.1Division 3.4.5.1
  852. 3.4.5.2Division 3.4.5.2
  854. Division
  855. 3.4.5.3.1Division 3.4.5.3.1
  856. 3.4.5.4Division 3.4.5.4
  858. Division
  859. 3.4.5.5.1Division 3.4.5.5.1
  860. 3.4.5.5.2Division 3.4.5.5.2
  861. 3.4.5.5.3Division 3.4.5.5.3
  863. Division
  864. 3.4.6.1Division 3.4.6.1
  865. 3.4.6.2Division 3.4.6.2
  866. 3.4.6.3Division 3.4.6.3
  868. Division
  869. 3.4.7.1Division 3.4.7.1
  870. 3.4.7.2Division 3.4.7.2
  872. 3.4.7.6.3Division 3.4.7.6.3
  873. 3.4.8Division 3.4.8
  874. 3.4.9Division 3.4.9
  876. 3.5.2Division 3.5.2
  879. 6.6.1Division 6.6.1
  881. 9.1Division 9.1
  883. Division
  885. Division
  886. 16.1.1Division 16.1.1
  887. 16.2Division 16.2
  888. 16.3Division 16.3
  889. Annex XIX: SPECIAL PROVISIONS REGARDING ANNEX III TO COUNCIL DIRECTIVE 70/156/EEC
  893. 3.2.1.1Division 3.2.1.1
  895. Division
  896. 3.2.2.4Division 3.2.2.4
  897. 3.2.2.5Division 3.2.2.5
  899. 3.2.12.2Division 3.2.12.2
  901. Division
  902. 3.4.1Division 3.4.1
  903. 3.4.2Division 3.4.2
  906. 6.6.1Division 6.6.1
  908. 9.1Division 9.1
  910. Division
  911. 16.1Division 16.1
  912. Annex XX: MEASUREMENT OF NET ENGINE POWER, NET POWER AND THE MAXIMUM 30 MINUTES POWER OF ELECTRIC DRIVE TRAIN
  913. 1INTRODUCTION
  914. GENERAL SPECIFICATIONS
  915. 2.1Division 2.1
  916. 2.2Test fuel
  917. 2.3Power correction factors