OpenLegislation

Appendix 2 Statistical procedure for in-service conformity testing

United Kingdom

Original text. Later amendments are not shown.

1.

This procedure shall be used to verify the in-service conformity requirements for the type 1 test. The applicable statistical method shall be the one set out in Appendix 4 to UN/ECE Regulation No 83, with the exceptions set out in sections 2, 3 and 4.

2.

Footnote 1 shall not apply.

3.

In paragraphs 3.2.3.2.1 and 3.2.4.2 of Appendix 4 to UN/ECE Regulation No 83, the reference to paragraph 6 of Appendix 3 shall be understood as reference to Section 6 of Appendix 1 to Annex XV to this Regulation.

4.

In Figure 4/1. of Appendix 4 to UN/ECE Regulation No 83, the following shall apply:

  1. (a)

    the references to paragraph 8.2.1 shall be understood as reference to Section 1.1 of Annex XV to this Regulation;

  2. (b)

    the reference to Appendix 3 shall be understood as reference to Appendix 1 of Annex XV to this Regulation;

  3. (c)

    footnote 1 shall be understood as follows: In this case, TAA means the approval authority that granted the type-approval according to Directive 70/220/EC.