OpenLegislation

Division 2.1.1 Final conformity factorsF1F2

United Kingdom

Original text. Later amendments are not shown.

The conformity factor CF pollutant for the respective pollutant is specified as follows:

CO emissions shall be measured and recorded at RDE tests.

Pollutant Mass of oxides of nitrogen (NO x ) Number of particles (PN) Mass of carbon monoxide (CO) f1 Mass of total hydrocarbons (THC) Combined mass of total hydrocarbons and oxides of nitrogen (THC + NO x )
CF pollutant 1 + margin with margin = 0,5 to be determined — — —

‘ margin ’ is a parameter taking into account the additional measurement uncertainties introduced by the PEMS equipment, which are subject to an annual review and shall be revised as a result of the improved quality of the PEMS procedure or technical progress.

Annotations

Textual amendments

F1

Inserted by Commission Regulation (EU) 2016/427 of 10 March 2016 amending Regulation (EC) No 692/2008 as regards emissions from light passenger and commercial vehicles (Euro 6) (Text with EEA relevance).

F2

Inserted by Commission Regulation (EU) 2016/646 of 20 April 2016 amending Regulation (EC) No 692/2008 as regards emissions from light passenger and commercial vehicles (Euro 6) (Text with EEA relevance).

Footnotes

f1

CO emissions shall be measured and recorded at RDE tests.

Notes on Division 2.1

Textual amendments

F2

Substituted by Commission Regulation (EU) 2016/646 of 20 April 2016 amending Regulation (EC) No 692/2008 as regards emissions from light passenger and commercial vehicles (Euro 6) (Text with EEA relevance).