Appendix 1 MODEL
United Kingdom
The following information, if applicable, must be supplied in triplicate and include a list of contents. Any drawings must be supplied in appropriate scale and sufficient detail on size A4 or on a folder of A4 format. Photographs, if any, must show sufficient detail.
If the systems, components or separate technical units have electronic controls, information concerning their performance must be supplied.
0.
GENERAL
0.1.
Make (trade name of manufacturer):
0.2.
Type:
0.2.1.
Commercial name(s), if available:
0.5.
Name and address of manufacturer:
Name and address of authorised representative, if any:
0.7.
In the case of components and separate technical units, location and method of affixing of the EC approval mark:
0.8.
Address(es) of assembly plant(s):
1.
DESCRIPTION OF THE DEVICE
1.1.
Make and type of the replacement pollution control device:
1.2.
Drawings of the replacement pollution control device, identifying in particular all the characteristics referred to under point 8 of Article 2 of [this Regulation]:
1.3.
Description of the vehicle type or types for which the replacement pollution control device is intended:
1.3.1.
Number(s) and/or symbol(s) characterising the engine and vehicle type(s):
1.3.2.
Is the replacement pollution control device intended to be compatible with OBD requirements (Yes/No)f1
1.4.
Description and drawings showing the position of the replacement pollution control device relative to the engine exhaust manifold(s):
Annotations
Footnotes
- f1
-
Delete where not applicable