Division 4 F1

On the basis of the audit referred to in Section 2 the approval authority shall adopt one of the following decisions and actions:

1. (a)

   decide that the in-service conformity of a vehicle type, vehicle in-service family or vehicle OBD family is satisfactory and not take any further action;

2. (b)

   decide that the data provided by the manufacturer is insufficient to reach a decision and request additional information or test data from the manufacturer;

3. (c)

   decide that based on data from the approval authority or Member State surveillance testing programmes, that information provided by the manufacturer is insufficient to reach a decision and request additional information or test data from the manufacturer;

4. (d)

   decide that the in-service conformity of a vehicle type, that is part of an in-service family, or of an OBD family, is unsatisfactory and proceed to have such vehicle type or OBD family tested in accordance with Appendix 1.

If according to the IUPR _M audit the test criteria of point 6.1.2 point (a) or (b) of Appendix 1 are met for the vehicles in a sample lot, the type-approval authority must take the further action described in point (d) of this point.