Article 27 Controls of imported productsF10
United Kingdom
The authorities in charge of the control of products entering Great Britain must carry out appropriate checks on the characteristics of products on an adequate scale, in accordance with the principles set out in Article 19(1), before those products are discharged from the free-circulation procedure.
The authorities in charge of external border controls F4must suspend F5the discharge of a product from the free-circulation procedure when any of the following findings are made in the course of the checks referred to in paragraph 1:
the product displays characteristics which give cause to believe that the product, when properly installed, maintained and used, presents a serious risk to health, safety, the environment or any other public interest referred to in Article 1;
the product is not accompanied by the written or electronic documentation required by F6any relevant enactment or is not marked in accordance with that legislation;
F7a conformity marking has been affixed to the product in a false or misleading manner.
The authorities in charge of external border controls must immediately notify the market surveillance authorities of any such suspension.
In the case of perishable products, the authorities in charge of external border controls F8must, as far as possible, seek to ensure that any requirements they may impose with regard to the storage of products or the parking of vehicles used for transport are not incompatible with the preservation of those products.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Annotations
Textual amendments
- F1
Art. 27(1) substituted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 33 para. 26(a) (as amended by S.I. 2020/1460, reg. 1(4), Sch. 3 para. 22(6)); 2020 c. 1, Sch. 5 para. 1(1)
- F2
Words in Art. 27(2) omitted (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 33 para. 26(b)(i); 2020 c. 1, Sch. 5 para. 1(1)
- F3
Word in Art. 27(2) substituted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 33 para. 26(b)(ii); 2020 c. 1, Sch. 5 para. 1(1)
- F4
Word in Art. 27(3) substituted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 33 para. 26(c)(i); 2020 c. 1, Sch. 5 para. 1(1)
- F5
Words in Art. 27(3) substituted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 33 para. 26(c)(ii); 2020 c. 1, Sch. 5 para. 1(1)
- F6
Words in Art. 27(3)(b) substituted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 33 para. 26(c)(iii); 2020 c. 1, Sch. 5 para. 1(1)
- F7
Words in Art. 27(3)(c) substituted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 33 para. 26(c)(iv); 2020 c. 1, Sch. 5 para. 1(1)
- F8
Word in Art. 27(4) substituted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 33 para. 26(d); 2020 c. 1, Sch. 5 para. 1(1)
- F9
Art. 27(5) omitted (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 33 para. 26(e); 2020 c. 1, Sch. 5 para. 1(1)
- F10
Art. 27 heading substituted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 33 para. 26(a); 2020 c. 1, Sch. 5 para. 1(1)
Notes on Chapter III
Textual amendments
- F1
Word in Ch. 3 heading omitted (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 33 para. 13(a) (as amended by S.I. 2020/676, regs. 1(1), 3); 2020 c. 1, Sch. 5 para. 1(1)
- F2
Words in Ch. 3 heading substituted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 33 para. 13(b) (as substituted by S.I. 2020/1460, reg. 1(4), Sch. 3 para. 22(5)); 2020 c. 1, Sch. 5 para. 1(1)
Notes on Section 3
Textual amendments
- F1
Word in Ch. 3 s. 3 heading inserted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 33 para. 25(a); 2020 c. 1, Sch. 5 para. 1(1)
- F2
Words in Ch. 3 s. 3 heading omitted (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 33 para. 25(b); 2020 c. 1, Sch. 5 para. 1(1)