OpenLegislation

Division [2B004] Hot "isostatic presses" having all of the following, and specially designed components and accessories therefor:F1

United Kingdom

Changes not yet applied. Later legislation changes this provision in ways not yet written into the text below:

NB: SEE ALSO 2B104 and 2B204.

  1. a..

    A controlled thermal environment within the closed cavity and a chamber cavity with an inside diameter of 406 mm or more; and

  2. b..

    Having any of the following:

    1. 1..

      A maximum working pressure exceeding 207 MPa;

    2. 2..

      A controlled thermal environment exceeding 1 773 K (1 500 °C); or

    3. 3..

      A facility for hydrocarbon impregnation and removal of resultant gaseous degradation products.

Technical Note:

F2For the purposes of 2B004, the inside chamber dimension is that of the chamber in which both the working temperature and the working pressure are achieved and does not include fixtures. That dimension will be the smaller of either the inside diameter of the pressure chamber or the inside diameter of the insulated furnace chamber, depending on which of the two chambers is located inside the other.

NB: For specially designed dies, moulds and toolingF3, see 1B003, 9B009 and the Military Goods Controls.

Annotations

Textual amendments

F1

Substituted by Commission Delegated Regulation (EU) 2020/1749 of 7 October 2020 amending Council Regulation (EC) No 428/2009 setting up a Community regime for the control of exports, transfer, brokering and transit of dual-use items.

F2

Words in Annex 1 Entry 2B004 substituted (13.7.2023) by The Export Control (Amendment) Regulations 2023 (S.I. 2023/695), regs. 1(1), 3(2)(d)(v)

F3

Annex 1 Entry 2B004 comma inserted (20.5.2025) by The Export Control (Amendment) Regulations 2025 (S.I. 2025/532), regs. 1(2), 10(2)(g)

Notes on Division [2B]

Textual amendments

F2

Words in Annex 1 Entry 2B substituted (13.7.2023) by The Export Control (Amendment) Regulations 2023 (S.I. 2023/695), regs. 1(1), 3(2)(d)(iv)(aa)

F3

Words in Annex 1 Entry 2B substituted (13.7.2023) by The Export Control (Amendment) Regulations 2023 (S.I. 2023/695), regs. 1(1), 3(2)(d)(iv)(bb)

F4

Word in Annex 1 Entry 2B substituted (13.7.2023) by The Export Control (Amendment) Regulations 2023 (S.I. 2023/695), regs. 1(1), 3(2)(d)(iv)(dd)

F5

Words in Annex 1 Entry 2B substituted (13.7.2023) by The Export Control (Amendment) Regulations 2023 (S.I. 2023/695), regs. 1(1), 3(2)(d)(iv)(cc)

F6

Word in Annex 1 Entry 2B substituted (13.7.2023) by The Export Control (Amendment) Regulations 2023 (S.I. 2023/695), regs. 1(1), 3(2)(d)(iv)(ee)

F7

Word in Annex 1 Entry 2B substituted (13.7.2023) by The Export Control (Amendment) Regulations 2023 (S.I. 2023/695), regs. 1(1), 3(2)(d)(iv)(ff)