Appendix ANNEX IV GB TYPE-APPROVAL MARKF1

This mark shall consist of:

A rectangle surrounding the lower-case letter F2‘g’ followed by the number 11.

In the vicinity of the rectangle the ‘base approval number’ contained in Section 4 of the type-approval number referred to in F3Annex IV to Regulation (EU) 2020/683, preceded by the two figures indicating the sequence number assigned to the latest major technical amendment to this Regulation on the date the F4GB type-approval was granted. The sequence number for this Regulation is 02.

The following additional letters located above the rectangle:

‘A’ to indicate that the frontal protection system was approved in compliance with the requirements of point 5.1.1.1 of Annex I and is suitable for fitting to vehicles that comply with Section 2 of Annex I;

‘B’ to indicate that the frontal protection system was approved in compliance with the requirements of point 5.1.1.2 of Annex I and is suitable for fitting to vehicles that comply with Section 3 of Annex I;

‘X’ to indicate that the frontal protection system was approved under the consideration, for the legform impactor test, allowed by points 5.1.1.3 or 5.1.2.2 of Annex I and is only suitable for fitting to vehicles that do not comply with either Section 2 or Section 3 of Annex I.

The GB type-approval mark shall be clearly legible, indelible and clearly visible when installed on the vehicle.

An example of the approval mark is given in the Appendix to this Annex.