OpenLegislation

Commission Delegated Regulation (EU) No 1062/2010 of 28 September 2010 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to energy labelling of televisions (Text with EEA relevance) (revoked)

EU Regulation No 1062/2010 · Adopted 28 September 2010 · Extends to United Kingdom

Original text. legislation.gov.uk does not revise this item, so later amendments are not shown here. Changes made to it are listed under each provision when known.

Commission Delegated Regulation (EU) No 1062/2010

of 28 September 2010

supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to energy labelling of televisions

(Text with EEA relevance) (revoked)

F1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Annotations to the whole text

Textual amendments

F1

Regulation revoked (1.3.2021) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(3), 28(d)

Contents

  1. 1Subject matter Repealed
  2. 2Definitions Repealed
  3. 3Responsibilities of suppliers Repealed
  4. 4Responsibilities of dealers Repealed
  5. 5Measurement methods Repealed
  6. 6Verification procedure for market surveillance purposes Repealed
  7. 7Revision Repealed
  8. 8Transitional provision Repealed
  9. 9Entry into force Repealed
  10. Signature
  11. Annex IEnergy efficiency class Repealed
  12. Annex II: Method for calculating the Energy Efficiency Index and the annual on-mode energy consumption Repealed
  13. 1The Energy Efficiency Index (EEI) is calculated as EEI = P/Pref (A), where: Repealed
  14. 2Division 2 Repealed
  15. 3Televisions with automatic brightness control Repealed
  16. Annex III: Product fiche Repealed
  17. 1The information in the product fiche of the television shall be provided in the following order, and shall be included in the product brochure or other literature provided with the product: Repealed
  18. 2Division 2 Repealed
  19. 3Division 3 Repealed
  20. Annex IVTechnical documentation Repealed
  21. Annex V: Label Repealed
  22. 1LABEL 1 Repealed
  23. 2LABEL 2 Repealed
  24. 3LABEL 3 Repealed
  25. 4LABEL 4 Repealed
  26. 5Division 5 Repealed
  27. Annex VI: Information to be provided in the cases where end-users cannot be expected to see the product displayed Repealed
  28. 1The information referred to in Article 4(b) shall be provided in the following order: Repealed
  29. 2Division 2 Repealed
  30. 3Division 3 Repealed
  31. Annex VII: Measurements Repealed
  32. 1Division 1 Repealed
  33. 2Measurements of on-mode power consumption referred to in point 1 of Annex II Repealed
  34. 3Measurements of standby/off-mode power consumption referred to in point 1(g) of Annex III Repealed
  35. 4Measurements of peak luminance ratio referred to in Table 2 of Annex VIII Repealed
  36. Annex VIIIProduct compliance verification by market surveillance authorities Repealed
  37. Annex IX: Information to be provided in the case of sale, hire or hire-purchase through the internet Repealed
  38. (1)For the purpose of points 2 to 5 of this Annex the following definitions shall apply: Repealed
  39. (2)Division (2) Repealed
  40. (3)The image used for accessing the label in the case of nested display shall: Repealed
  41. (4)In the case of nested display, the sequence of display of the label shall be as follows: Repealed
  42. (5)Division (5) Repealed

1Subject matterF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2DefinitionsF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3Responsibilities of suppliersF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4Responsibilities of dealersF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5Measurement methodsF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6Verification procedure for market surveillance purposesF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7RevisionF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8Transitional provisionF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9Entry into forceF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Signature

F1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Annex IEnergy efficiency classF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1The Energy Efficiency Index (EEI) is calculated as EEI = P/Pref (A), where:F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3Televisions with automatic brightness controlF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1The information in the product fiche of the television shall be provided in the following order, and shall be included in the product brochure or other literature provided with the product:F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Annex IVTechnical documentationF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1LABEL 1F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2LABEL 2F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3LABEL 3F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4LABEL 4F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1The information referred to in Article 4(b) shall be provided in the following order:F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2Measurements of on-mode power consumption referred to in point 1 of Annex IIF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3Measurements of standby/off-mode power consumption referred to in point 1(g) of Annex IIIF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4Measurements of peak luminance ratio referred to in Table 2 of Annex VIIIF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Annex VIIIProduct compliance verification by market surveillance authoritiesF1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(1)For the purpose of points 2 to 5 of this Annex the following definitions shall apply:F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(2)F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(3)The image used for accessing the label in the case of nested display shall:F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(4)In the case of nested display, the sequence of display of the label shall be as follows:F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(5)F1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .