Division Values for the code list FaultTypeValueF1
United Kingdom
| Value | Name | Definition | Parent |
|---|---|---|---|
| fault | fault | A discrete surface, or zone of discrete surfaces, with some thickness, separating two rock masses across which one mass has slid past the other. | |
| extractionFault | extraction fault | A fault whose two sides have approached each other substantially in the direction perpendicular to the fault. | fault |
| highAngleFault | high angle fault | Fault that dips at least 45 degrees over more than half of its recognized extent, for which slip or separation is not explicitly specified. | fault |
| lowAngleFault | low angle fault | Fault that dips less than 45 degrees over more than half of the recognized extent of the fault. | fault |
| obliqueSlipFault | oblique slip fault | Fault with slip vector that has ratio of strike-parallel to dip-parallel displacement between 10 to 1 and 1 to 10 at at least one location along the mapped trace of the fault. | fault |
| reverseFault | reverse fault | Fault with dip-parallel displacement component of slip vector more than 10 times the strike-parallel component of the slip vector at at least one location along the mapped trace of the fault, and the fault dips consistently in the same direction with the hanging wall displaced up relative to the footwall over at least half the mapped trace of the fault. | fault |
| scissorFault | scissor fault | A fault on which there is increasing offset or separation along the strike from an initial point of no offset, with the opposite sense of offset in the opposite direction. | fault |
| strikeSlipFault | strike slip fault | Fault with strike-parallel displacement component of slip vector more than 10 times the dip-parallel component of the slip vector at at least one location along the mapped trace of the fault. | fault |
Annotations
Textual amendments
Notes on Annex III
Textual amendments
- F2
Words in Annex 3 heading substituted (31.12.2020) by The INSPIRE (Amendment) (EU Exit) Regulations 2018 (S.I. 2018/1338), regs. 1, 13(12)(a); 2020 c. 1, Sch. 5 para. 1(1)