Division
In the case of steel inner tanks, the lower limit of the impermissible fault range corresponds to a pressure higher than 136 per cent of the Maximum Allowable Working Pressure (MAWP) of the inner tank if a safety valve is used as secondary pressure relief device. In case of steel inner tanks, the lower limit of the impermissible fault range corresponds to a pressure higher than 150 per cent of the Maximum Allowable Working Pressure (MAWP) of the inner tank if a burst disk is used as secondary pressure relief device. For other materials an equivalent level of safety is to be applied. The impermissible fault range shall be the pressure at which plastic deformation or bursting of the inner tank occurs as shown in Figure 3.2.