OpenLegislation

Division 4.2.3.2 Procedure

Original text. Later amendments are not shown.

The container shall be tested using the following procedure:

  1. (a)

    Fill the container to be tested with a non-corrosive fluid such as oil, inhibited water or glycol;

  2. (b)

    Pressure cycle the container between ≤ 2,0 MPa and ≥ 1,5 times nominal working pressure at a rate of ≤ 10 cycles per minute to 3,0 times the number of filling cycles in accordance with section 2.7.6.