OpenLegislation

Annex I

United Kingdom

Original text. Later amendments are not shown.

Annex I to Regulation (EU) No 1089/2010 is amended as follows:

  1. 1..

    All occurrences of ‘This code list shall be managed in a common code list register.’ are replaced by ‘This code list shall not be extended by Member States.’

  2. 2..

    In point 4.1, the following table is added:

    Allowed values for the code list ConditionOfFacilityValue

    ValueDefinition
    disusedThe facility is not used.
    functionalThe facility is functional.
    projectedThe facility is being designed. Construction has not yet started.
    underConstructionThe facility is under construction and not yet functional. This applies only to the initial construction of the facility and not to maintenance work.
  3. 3..

    In point 4.2, the following paragraphs are added:

    ‘This code list shall not be extended by Member States.

    The allowed values for this code list are the two-letter country codes listed in the Interinstitutional style guide published by the Publications Office of the European Union.’

  4. 4..

    In point 5.3.1, the following table is added:

    Allowed values for the code list ConnectionTypeValue

    ValueDefinition
    crossBorderConnectedConnection between two network elements in different networks of the same type, but in adjacent areas. The referenced network elements represent the different, but spatially connected real-world phenomena.
    crossBorderIdenticalConnection between two network elements in different networks of the same type, but in adjacent areas. The referenced network elements represent the same real-world phenomena.
    intermodalConnection between two network elements in different transport networks that use a different transport mode. The connection represents a possibility for the transported media (people, goods, etc) to change from one transport mode to another.
  5. 5..

    In point 5.3.2, the following table is added:

    Allowed values for the code list LinkDirectionValue

    ValueDefinition
    bothDirectionsIn both directions.
    inDirectionIn direction of the link.
    inOppositeDirectionIn the opposite direction of the link.