Division 4.2 Installation of a type-approved engine on a vehicle
United Kingdom
The installation of an engine type approved as a separate technical unit on a vehicle shall, in addition, comply with the following requirements:
- (a)
as regard the compliance of the OBD system, the installation shall, according to Appendix 1 of Annex 9B to UN/ECE Regulation No 49, meet the manufacturer's installation requirements as specified in Part 1 of Appendix 4;
- (b)
F1as regards the compliance of the system ensuring the correct operation of NO x control measures, the installation shall, according to Appendix 4 of Annex 11 to UN/ECE Regulation No 49, meet the manufacturer's installation requirements as specified in Part 1 of Annex 1 to that Regulation;
- (c)
F2the installation of a dual-fuel engine type-approved as a separate technical unit on a vehicle shall, in addition, meet the specific installation requirements set out in paragraph 6 of Annex 15 to UNECE Regulation No 49 and the manufacturer’s installation requirements set out in Section 7 of Annex XVIII to this Regulation.
Annotations
Textual amendments
- F1
- F2
Notes on Annex I
Textual amendments
- F1
Words in Annex 1 heading substituted (31.12.2022 at 11.00 p.m.) by The Road Vehicles and Non-Road Mobile Machinery (Type-Approval) (Amendment and Transitional Provisions) (EU Exit) Regulations 2022 (S.I. 2022/1273), regs. 1(2), 66(2)(a)