Appendix 1

The following information shall be supplied in triplicate and include a list of contents. Any drawings shall be supplied in appropriate scale and sufficient detail on size A4 or on a folder of A4 format. Photographs, if any, shall show sufficient detail.

If the systems, components or separate technical units have electronic controls, information concerning their performance shall be supplied.

Make (trade name of manufacturer): …

1. 0.2.1.

   Commercial name(s) (if available): …

Means of identification of type: …

Name and address of manufacturer: …

In the case of components and separate technical units, location and method of affixing of the F2GB approval mark: …

Name(s) and address(es) of assembly plant(s): …

Name and address of the manufacturer’s authorised representative (if any): …

Type of the replacement pollution control device: (oxidation catalyst, three-way catalyst, SCR catalyst, particulate filter, etc.) …

Drawings of the replacement pollution control device, identifying in particular all the characteristics referred to under ‘type of pollution control device’ of Article 2 of Regulation (EU) No 582/2011: …

1. 1.3.1.

   Number(s) and/or symbol(s) characterising the engine and vehicle type(s): …

2. 1.3.2

   Number(s) and/or symbol(s) characterising the original pollution control device(s) which the replacement pollution control device is intended to replace: …

3. 1.3.3.

   Is the replacement pollution control device intended to be compatible with OBD requirements (Yes/No)^f1

4. 1.3.4.

   Is the replacement pollution control device compatible with existing vehicle/engine control systems (yes/no)

Description and drawings showing the position of the replacement pollution control device relative to the engine exhaust manifold(s): …

. . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . .