Division 1.4.2 In the case referred to in point 1.4.1, the manufacturer shall indicate one or both of the following additional symbols below or to the side of the mandatory inscriptions on the manufacturer’s statutory plate, outside a clearly marked rectangle which shall enclose only the mandatory information.F1 F2

United Kingdom

‘96/53/EC ARTICLE 9A COMPLIANT’ F3, or

F4‘C&U REGULATION 7(3D) COMPLIANT’

The height of the symbol’s characters shall not be less than 4 mm. The F5symbols above shall also be added to the ‘remarks’ in the Certificate of Conformity as to allow inclusion of this information in on-board vehicle registration papers.

Annotations

Textual amendments

F1: Inserted by Commission Regulation (EU) 2019/1892 of 31 October 2019 amending Regulation (EU) No 1230/2012 as regards type-approval requirements for certain motor vehicles fitted with elongated cabs and for aerodynamic devices and equipment for motor vehicles and their trailers (Text with EEA relevance).
F2: Words in Annex 1 Pt. C point 1.4.2 substituted (31.12.2022 at 11.00 p.m.) by The Road Vehicles and Non-Road Mobile Machinery (Type-Approval) (Amendment and Transitional Provisions) (EU Exit) Regulations 2022 (S.I. 2022/1273), regs. 1(2), 72(2)(c)(iv)(aa)
F3: Word in Annex 1 Pt. C point 1.4.2 inserted (31.12.2022 at 11.00 p.m.) by The Road Vehicles and Non-Road Mobile Machinery (Type-Approval) (Amendment and Transitional Provisions) (EU Exit) Regulations 2022 (S.I. 2022/1273), regs. 1(2), 72(2)(c)(iv)(bb)
F4: Words in Annex 1 Pt. C point 1.4.2 inserted (31.12.2022 at 11.00 p.m.) by The Road Vehicles and Non-Road Mobile Machinery (Type-Approval) (Amendment and Transitional Provisions) (EU Exit) Regulations 2022 (S.I. 2022/1273), regs. 1(2), 72(2)(c)(iv)(cc)
F5: Words in Annex 1 Pt. C point 1.4.2 substituted (31.12.2022 at 11.00 p.m.) by The Road Vehicles and Non-Road Mobile Machinery (Type-Approval) (Amendment and Transitional Provisions) (EU Exit) Regulations 2022 (S.I. 2022/1273), regs. 1(2), 72(2)(c)(iv)(dd)