OpenLegislation

Division 4.2 Standard gear shift points

United Kingdom

Original text. Later amendments are not shown.

Vn std shall denote the speed at which a typical driver is assumed to shift up from gear n into gear n + 1 without GSI recommendation. Based on the gear shift points defined in the type 1 emission testf1 the following standard gear shift speeds are defined:

V0 std
  • 0 km/h;

  • V1 std
  • 15 km/h;

  • V2 std
  • 35 km/h;

  • V3 std
  • 50 km/h;

  • V4 std
  • 70 km/h;

  • V5 std
  • 90 km/h;

  • V6 std
  • 110 km/h;

  • V7 std
  • 130 km/h;

  • V8 std
  • V#g GSI;

  • Vn min shall denote the minimum vehicle speed the vehicle can be driven in the gear n without stalling of the engine and Vn max the maximum vehicle speed the vehicle can be driven in the gear n without creating damage to the engine.

    If Vn std derived from this list is smaller than Vn + 1 min, then Vn std is set to be Vn + 1 min. If Vn std derived from this list is greater than Vn max, then Vn std is set to be Vn max (n = 1, 2, …, #g – 1).

    If V#g std determined by this procedure is smaller than V#g GSI, it shall be set to V#g GSI.

    Annotations

    Footnotes

    f1

    Defined in Annex 4a of UNECE Regulation No 83, 05 series of amendments.